HARDWARE IDENTIFICATION CHART
This chart is provided to help identify the hardware used in the assembly process. Place the washers, the end of the bolts, or screws on the circles to check for the correct diameter. Use the small scale to check the length of the bolts and screws.
| 3/16" |
| 1/4" | 5/16" | 3/8" |
| 1/2" |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
| INCHES |
|
|
| |
0 | 1/2 |
| 1 | 1/2 | 2 | 1/2 | 3 |
| 1/2 | 4 | 1/2 | 5 | 1/2 | 6 | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| in. |
0 | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | mm. |
150 | |||||||||||||||
|
|
|
|
|
|
|
|
| MILLIMETERS |
| length | ||||
| 6 |
| 8 |
| 10 |
| 12 |
|
|
|
|
|
|
|
|
NOTICE: The bolt length is measured from the bottom of the head of the
bolt to the end of the bolt. The head of the bolt is not included in length 
the measurement unless the it is a flat head screw or bolt.
After unpacking the unit, open the hardware bag and make sure that you have all the following items. Some hardware may be already attached to the part.
Part No. and Description | Qty | |
24 | Pivot Bolt | 2 |
84 | Bolt, Button Head (M6 x 1 x 82mm) | 6 |
85 | Bolt, Button Head (M8 x 1.25 x 15mm) | 24 |
86 | Bolt, Button Head (M8 x 1.25 x 25mm) | 8 |
88 | Bolt, Button Head (M8 x 1.25 x 35mm) | 12 |
89 | Bolt, Button Head (M8 x 1.25 x 42mm) | 2 |
93 | Bolt, Flat Head (M6 x 1 x 15mm) | 2 |
94 | Bolt, Flat Head (M8 x 1.25 x 15mm) | 2 |
99 | Screw, Flat Head (M4.5 x 15mm) | 8 |
103 Nylock Nut (M8 x 1.25) | 4 | |
104 | Washer (M8) | 4 |
6