Axis Communications P7210 user manual Recipients, Recipient Use with action

AXIS P7210 Video Encoder

Events

To add additional criteria, select the Additional conditions option and add additional triggers. To prevent an action from being triggered repeatedly, a Wait at least time can be set. Enter the time in hours, minutes and seconds, during which the trigger should be ignored before the action rule can be activated again.

The recording Duration of some actions can be set to include time immediately before and after the event. Select Pre-trigger time and/or Post-trigger time and enter the number of seconds. When While the rule is active is enabled and the action is triggered again during the post-trigger time, the recording time will be extended with another post-trigger time period.

For more information, see the online help .

Recipients

Recipients receive media files and notification messages. The following recipients are available:

Recipient	Use with action
Email1	Send Images
	Send Notification
	Send Video Clip
FTP	Send Images
	Send Video Clip
HTTP	Send Images
	Send Notification
	Send Video Clip
HTTPS	Send Images
	Send Notification
	Send Video Clip
Network Share2	Send Images
	Send Video Clip
TCP	Send Notification

1.Some email providers have security filters that prevent users from receiving or viewing large amount of attachments, from receiving scheduled emails and similar. Check the email provider’s security policy to avoid delivery problems and locked email accounts.

2.A network share can also be used as a storage device for recorded video. Go System Options > Storage to configure a network share before setting up a continuous recording or an action rule to record video. See Storage, on page 46 for more information about storage devices.

To add a recipient:

1.Go to Events > Recipients and click Add.

2.Enter a descriptive name.

3.Select a recipient Type.

4.Enter the information needed for the recipient type.

5.Click Test to test the connection to the recipient.

6.Click OK.

35