Axis Communications P7210 Advanced TCP/IP Settings, DNS Configuration, NTP Configuration

Page 43

AXIS P7210 Video Encoder

System Options

To register the Axis product with AXIS Internet Dynamic DNS Service, go to System Options > Network > TCP/IP > Basic. Under Services, click the AXIS Internet Dynamic DNS Service Settings button (requires access to the Internet). The domain name currently registered at AXIS Internet Dynamic DNS service for the product can at any time be removed.

Advanced TCP/IP Settings

DNS Configuration

DNS (Domain Name Service) provides the translation of host names to IP addresses. The DNS settings are configured under System Options > Network > TCP/IP > Advanced.

Select Obtain DNS server address via DHCP to use the DNS settings provided by the DHCP server.

To make manual settings, select Use the following DNS server address and specify the following:

Domain name - Enter the domain(s) to search for the host name used by the Axis product. Multiple domains can be separated by semicolons. The host name is always the first part of a fully qualified domain name, for example, myserver is the host name in the fully qualified domain name myserver.mycompany.com where mycompany.com is the domain name.

Primary/Secondary DNS server - Enter the IP addresses of the primary and secondary DNS servers. The secondary DNS server is optional and will be used if the primary is unavailable.

NTP Configuration

NTP (Network Time Protocol) is used to synchronize the clock times of devices in a network. The NTP settings are configured under System Options > Network > TCP/IP > Advanced.

Select Obtain NTP server address via DHCP to use the NTP settings provided by the DHCP server.

To make manual settings, select Use the following NTP server address and enter the host name or IP address of the NTP server.

Host Name Configuration

The Axis product can be accessed using a host name instead of an IP address. The host name is usually the same as the assigned DNS name. The host name is configured under System Options > Network > TCP/IP > Advanced.

Select Obtain host name via IPv4 DHCP to use host name provided by the DHCP server running on IPv4.

Select Use the host name to set the host name manually.

Select Enable dynamic DNS updates to dynamically update local DNS servers whenever the Axis product’s IP address changes.

For more information, see the online help .

Link-Local IPv4 Address

Link-Local Address is enabled by default and assigns the Axis product an additional IP address which can be used to access the product from other hosts on the same segment on the local network. The product can have a Link-Local IP and a static or DHCP-supplied IP address at the same time.

This function can be disabled under System Options > Network > TCP/IP > Advanced.

HTTP

The HTTP port used by the Axis product can be changed under System Options > Network > TCP/IP > Advanced. In addition to the default setting, which is 80, any port in the range 1024–65535 can be used.

HTTPS

The HTTPS port used by the Axis product can be changed under System Options > Network > TCP/IP > Advanced. In addition to the default setting, which is 443, any port in the range 1024–65535 can be used.

43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Axis P7210 Video Encoder Intellectual Property Rights About this DocumentLegal Considerations LiabilityLearn More SupportAxis P7210 Video Encoder Table of ContentsHardware Overview Connectors and ButtonsBNC Connector Network ConnectorRS485/RS422 Connector ConnectorPower Connector Audio ConnectorColor Indication Hardware Overview LED IndicatorsStart a browser Internet Explorer, Firefox, Safari Accessing the ProductAccessing the Product Access from a BrowserClick Use Https Accessing the Product Access from the InternetSet the Root Password Network TCP/IP AdvancedControls on the Live View Live ViewAxis Media Control viewer toolbar AMC Audio Controls PTZ ControlsAxis P7210 Video Encoder Axis Media Control AMC How to Stream H.264Media Streams Media StreamsQuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Accessing Audio StreamsSetting Up the Product Setting Up the ProductBasic Setup Video and Audio Video and AudioVideo Stream 264 Click Save to apply the new settingsPixel Counter ImageImage Appearance Camera SettingsQuad stream Stream ProfilesGo to Video & Audio Video Stream and select the Image tab Image SettingsOverlay Overlay ImagePrivacy Mask Using Overlay Text in an Action RuleGo to Events Action Rules Audio Modes Video and Audio Audio SettingsAudio Input Audio Output Audio ClipsLive View Config Live View ConfigDefault live view video Output Buttons Default Viewer for BrowsersViewer Settings User Defined LinksGo to Setup Live View Config PTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomLimits Device SettingsPTZ Pan Tilt Zoom Guard Tour AdvancedOSD Menu Installing a PTZ driverMotion Detection DetectorsDetectors Camera TamperingParameter Object Size History Sensitivity Description Set Up Motion Detection WindowsMotion Detection Parameters Go to Detectors Motion DetectionAudio Detection Events EventsGo to Events Action Rules and click Add Setting Up an Action RuleTime PTZ ControlRecipient Use with action RecipientsGo to Events Recipients and click Add Go to Events Schedules and click Add Setting Up an Email RecipientSchedules RecurrencesContinuous Recording RecordingsRecordings Recording ListLanguages LanguagesUsers System OptionsSystem Options SecurityCertificates IeeeGo to System Options Security Ieee Audio Support To install a self-signed certificateClick Install certificate and upload the certificate Date & TimeSystem Options Network Basic TCP/IP SettingsHost Name Configuration Advanced TCP/IP SettingsDNS Configuration NTP ConfigurationFTP NAT traversal port mapping for IPv4RTP/H.264 QoS Quality of ServiceUPnPTM can be disabled under System Options Network UPnPTM UPnPTMGo to System Options Storage and click SD Card StorageBonjour SD CardCOM Port Ports & DevicesNetwork Share PortsSystem Overview System Options MaintenanceSupport Support OverviewFile Upload Reset to Factory Default SettingsPlain Config ScriptingAxis P7210 Video Encoder Checking the Firmware TroubleshootingTroubleshooting Emergency Recovery ProcedureProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Problems with streaming H.264 Product is accessible locally but not externallyBasic Settings Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general Setup Video & Audio Camera SettingsReformat the SD card and then click Mount Storage and disk management problemsStorage disruption Re-mount the storage deviceTechnical Specifications Technical SpecificationsWeight Function/group Specifications System ApplicationMemory Power ConnectorsFunction Pin Specifications Technical Specifications ConnectorsFunction Pin RS-485/422 ConnectorPerformance Considerations Audio Input Audio OutputAxis P7210 Video Encoder M3.8
Top Page Image Contents