Axis Communications P7210 Accessing the Product Access from the Internet, Set the Root Password

Page 9

AXIS P7210 Video Encoder

Accessing the Product

Access from the Internet

Once connected, the Axis product is accessible on your local network (LAN). To access the product from the Internet you must configure your network router to allow incoming data traffic to the product. To do this, enable the NAT-traversal feature, which will attempt to automatically configure the router to allow access to the product. This is enabled from Setup > System Options >

Network > TCP/IP Advanced.

For more information, see NAT traversal (port mapping) for IPv4, on page 44. See also AXIS Internet Dynamic DNS Service at www.axiscam.net

For Technical notes on this and other topics, visit the Axis Support web at www.axis.com/techsup

Set the Root Password

To access the Axis product, you must set the password for the default administrator user root. This is done in the Configure Root Password dialog, which appears when the product is accessed for the first time.

To prevent network eavesdropping, the root password can be set via an encrypted HTTPS connection, which requires an HTTPS certificate. HTTPS (Hypertext Transfer Protocol over SSL) is a protocol used to encrypt traffic between web browsers and servers. The HTTPS certificate ensures encrypted exchange of information. See HTTPS, on page 39.

The default administrator user name root is permanent and cannot be deleted. If the password for root is lost, the product must be reset to the factory default settings. See Reset to Factory Default Settings, on page 49.

To set the password via a standard HTTP connection, enter it directly in the dialog.

To set the password via an encrypted HTTPS connection, follow these steps:

1.Click Use HTTPS.

A temporary certificate (valid for one year) is created, enabling encryption of all traffic to and from the product, and the password can now be set securely.

9

Image 9
Contents Axis P7210 Video Encoder Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis P7210 Video Encoder Table of ContentsBNC Connector Connectors and ButtonsNetwork Connector Hardware OverviewPower Connector ConnectorAudio Connector RS485/RS422 ConnectorColor Indication Hardware Overview LED IndicatorsAccessing the Product Accessing the ProductAccess from a Browser Start a browser Internet Explorer, Firefox, SafariSet the Root Password Accessing the Product Access from the InternetNetwork TCP/IP Advanced Click Use HttpsLive View Controls on the Live ViewAxis Media Control viewer toolbar AMC Audio Controls PTZ ControlsAxis P7210 Video Encoder Media Streams How to Stream H.264Media Streams Axis Media Control AMCQuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Accessing Audio StreamsSetting Up the Product Setting Up the ProductBasic Setup Video and Audio Video and AudioVideo Stream Pixel Counter Click Save to apply the new settingsImage 264Quad stream Camera SettingsStream Profiles Image AppearanceOverlay Image SettingsOverlay Image Go to Video & Audio Video Stream and select the Image tabUsing Overlay Text in an Action Rule Privacy MaskGo to Events Action Rules Video and Audio Audio Settings Audio ModesAudio Input Audio Output Audio ClipsLive View Config Live View ConfigDefault live view video Viewer Settings Default Viewer for BrowsersUser Defined Links Output ButtonsGo to Setup Live View Config Go to PTZ Preset Positions Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomPTZ Pan Tilt Zoom Guard Tour Device SettingsAdvanced LimitsOSD Menu Installing a PTZ driverDetectors DetectorsCamera Tampering Motion DetectionMotion Detection Parameters Set Up Motion Detection WindowsGo to Detectors Motion Detection Parameter Object Size History Sensitivity DescriptionAudio Detection Events EventsTime Setting Up an Action RulePTZ Control Go to Events Action Rules and click AddRecipients Recipient Use with actionGo to Events Recipients and click Add Schedules Setting Up an Email RecipientRecurrences Go to Events Schedules and click AddRecordings RecordingsRecording List Continuous RecordingLanguages LanguagesSystem Options System OptionsSecurity UsersIeee CertificatesGo to System Options Security Ieee Click Install certificate and upload the certificate To install a self-signed certificateDate & Time Audio SupportSystem Options Network Basic TCP/IP SettingsDNS Configuration Advanced TCP/IP SettingsNTP Configuration Host Name ConfigurationFTP NAT traversal port mapping for IPv4UPnPTM can be disabled under System Options Network UPnPTM QoS Quality of ServiceUPnPTM RTP/H.264Bonjour StorageSD Card Go to System Options Storage and click SD CardNetwork Share Ports & DevicesPorts COM PortSupport System Options MaintenanceSupport Overview System OverviewPlain Config Reset to Factory Default SettingsScripting File UploadAxis P7210 Video Encoder Troubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with streaming H.264Basic Video and image problems, general Status and Network indicator LEDs are flashing red rapidlySetup Video & Audio Camera Settings SettingsStorage disruption Storage and disk management problemsRe-mount the storage device Reformat the SD card and then click MountTechnical Specifications Technical SpecificationsMemory Power Function/group Specifications System ApplicationConnectors WeightFunction Pin Specifications Technical Specifications ConnectorsPerformance Considerations RS-485/422 ConnectorAudio Input Audio Output Function PinAxis P7210 Video Encoder M3.8