Axis Communications P7210 user manual Storage, Bonjour, SD Card

Page 46

AXIS P7210 Video Encoder

System Options

The RTP port range defines the range of ports from which the video/audio ports are automatically selected. For multicast streams, only certain IP addresses and port numbers should be used.

Select Always Multicast Video and/or Always Multicast Audio to start multicast streaming without opening an RTSP session.

Bonjour

The Axis product includes support for Bonjour. Bonjour is enabled by default and the product is automatically detected by operating systems and clients that support this protocol.

Bonjour can be disabled under System Options > Network > Bonjour.

Storage

SD Card

The Axis product supports SD cards with up to 64 GB of storage. For best recording performance, use an SDHC or SDXC card with speed class 10.

NOTICE

To prevent corruption of recordings, the SD card should always be unmounted before it is ejected.

The Axis product supports SD cards with the following file systems:

•ext4 — recommended due to its resilience against data loss if the card is ejected or if there is abrupt power loss. To access data stored on the card from the Windows operating system, a third-party ext4 driver or application is required.

•vFAT — most SD cards are pre-formatted with vFAT when purchased.

If required, the SD card can be manually formatted to the desired file system. To format the SD card:

1.Insert the SD card in the SD card slot.

2.Go to System Options > Storage and click SD Card.

3.Click Format and select the desired file system.

Note

During formatting any previous data stored on the disk will be lost.

Mounting is done automatically when the card is inserted or when the product is started. A manual mount is only required if the card has been unmounted and not ejected and re-inserted.

To unmount the SD card:

1.Go to System Options > Storage and click SD Card.

2.Click Unmount.

3.The card can now be removed.

The SD card is managed on the System Options > Storage page. Click SD Card to open Storage Management.

If the card’s status shows as failed, click Check disk to see if the problem can be found and then try Repair. This option is only available for SD cards with ext4. For SD cards with vFAT, use a card reader or computer to troubleshoot the card.

To avoid filling the card, it is recommended to remove recordings continuously. Under Recording Settings, select Remove recordings older than and select the number of days or weeks.

To stop writing to the card and protect recordings from being removed, select Lock under Recording Settings.

46

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Axis P7210 Video Encoder Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis P7210 Video EncoderNetwork Connector Connectors and ButtonsBNC Connector Hardware OverviewAudio Connector ConnectorPower Connector RS485/RS422 ConnectorHardware Overview LED Indicators Color IndicationAccess from a Browser Accessing the ProductAccessing the Product Start a browser Internet Explorer, Firefox, SafariNetwork TCP/IP Advanced Accessing the Product Access from the InternetSet the Root Password Click Use HttpsControls on the Live View Live ViewAxis Media Control viewer toolbar PTZ Controls AMC Audio ControlsAxis P7210 Video Encoder Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccessing Audio Streams Java applet supports simplex audio with G.711 encodingSetting Up the Product Setting Up the ProductBasic Setup Video and Audio Video and AudioVideo Stream Image Click Save to apply the new settingsPixel Counter 264Stream Profiles Camera SettingsQuad stream Image AppearanceOverlay Image Image SettingsOverlay Go to Video & Audio Video Stream and select the Image tabPrivacy Mask Using Overlay Text in an Action RuleGo to Events Action Rules Audio Modes Video and Audio Audio SettingsAudio Input Audio Clips Audio OutputLive View Config Live View ConfigDefault live view video User Defined Links Default Viewer for BrowsersViewer Settings Output ButtonsGo to Setup Live View Config PTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomAdvanced Device SettingsPTZ Pan Tilt Zoom Guard Tour LimitsInstalling a PTZ driver OSD MenuCamera Tampering DetectorsDetectors Motion DetectionGo to Detectors Motion Detection Set Up Motion Detection WindowsMotion Detection Parameters Parameter Object Size History Sensitivity DescriptionAudio Detection Events EventsPTZ Control Setting Up an Action RuleTime Go to Events Action Rules and click AddRecipient Use with action RecipientsGo to Events Recipients and click Add Recurrences Setting Up an Email RecipientSchedules Go to Events Schedules and click AddRecording List RecordingsRecordings Continuous RecordingLanguages LanguagesSecurity System OptionsSystem Options UsersCertificates IeeeGo to System Options Security Ieee Date & Time To install a self-signed certificateClick Install certificate and upload the certificate Audio SupportBasic TCP/IP Settings System Options NetworkNTP Configuration Advanced TCP/IP SettingsDNS Configuration Host Name ConfigurationNAT traversal port mapping for IPv4 FTPUPnPTM QoS Quality of ServiceUPnPTM can be disabled under System Options Network UPnPTM RTP/H.264SD Card StorageBonjour Go to System Options Storage and click SD CardPorts Ports & DevicesNetwork Share COM PortSupport Overview System Options MaintenanceSupport System OverviewScripting Reset to Factory Default SettingsPlain Config File UploadAxis P7210 Video Encoder Emergency Recovery Procedure TroubleshootingTroubleshooting Checking the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Problems with streaming H.264 Product is accessible locally but not externallyBasic Setup Video & Audio Camera Settings Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general SettingsRe-mount the storage device Storage and disk management problemsStorage disruption Reformat the SD card and then click MountTechnical Specifications Technical SpecificationsConnectors Function/group Specifications System ApplicationMemory Power WeightTechnical Specifications Connectors Function Pin SpecificationsAudio Input Audio Output RS-485/422 ConnectorPerformance Considerations Function PinAxis P7210 Video Encoder M3.8
Top Page Image Contents