Axis Communications P7210 Date & Time, Audio Support, To install a self-signed certificate

Page 41

AXIS P7210 Video Encoder

System Options

To install a self-signed certificate:

1.Go to System Options > Security > Certificates.

2.Click Create self-signed certificate and provide the requested information. To create and install a CA-signed certificate:

1.Create a self-signed certificate as described above.

2.Go to System Options > Security > Certificates.

3.Click Create certificate signing request and provide the requested information.

4.Copy the PEM-formatted request and send to the CA of your choice.

5.When the signed certificate is returned, click Install certificate and upload the certificate.

Server/Client certificates can be installed as Certificate from signing request or as Certificate and private key. Select Certificate and private key if the private key is to be upload as a separate file or if the certificate is in PKCS#12 format.

The Axis product is shipped with several preinstalled CA certificates. If required, additional CA certificates can be installed:

1.Go to System Options > Security > Certificates

2.Click Install certificate and upload the certificate.

Audio Support

Select Enable audio support to allow clients to retrieve audio streams from the Axis product. For information on how to configure audio settings, see Audio Settings, on page 22.

Note

Deselecting this option will disable audio globally in the Axis product, for configured events and profiles with audio as well.

Date & Time

The Axis product’s date and time settings are configured under System Options > Date & Time.

Current Server Time displays the current date and time (24h clock). The time can be displayed in 12h clock in the text overlay (see below).

To change the date and time settings, select the preferred Time mode under New Server Time:

•Synchronize with computer time sets date and time according to the computer’s clock. With this option, date and time are set once and will not be updated automatically.

•Synchronize with NTP Server obtains date and time from an NTP server. With this option, date and time settings are updated continuously. For information on NTP settings, see NTP Configuration, on page 43.

If using a host name for the NTP server, a DNS server must be configured. See DNS Configuration, on page 43.

•Set manually allows you to manually set date and time.

If using an NTP server, select your Time zone from the drop-down list. If required, check Automatically adjust for daylight saving time changes.

The Date & Time Format Used in Images is the date and time format displayed as a text overlay in the video stream. Use the

predefined formats or see File Naming & Date/Time Formats in the online help for information on how to create custom date and time formats. To include date and time in the overlay text, go to Video & Audio and select Include date and Include time.

41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Axis P7210 Video Encoder Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis P7210 Video Encoder Table of ContentsBNC Connector Connectors and ButtonsNetwork Connector Hardware OverviewPower Connector ConnectorAudio Connector RS485/RS422 ConnectorColor Indication Hardware Overview LED IndicatorsAccessing the Product Accessing the ProductAccess from a Browser Start a browser Internet Explorer, Firefox, SafariSet the Root Password Accessing the Product Access from the InternetNetwork TCP/IP Advanced Click Use HttpsAxis Media Control viewer toolbar Live ViewControls on the Live View AMC Audio Controls PTZ ControlsAxis P7210 Video Encoder Media Streams How to Stream H.264Media Streams Axis Media Control AMCQuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Accessing Audio StreamsBasic Setup Setting Up the ProductSetting Up the Product Video Stream Video and AudioVideo and Audio Pixel Counter Click Save to apply the new settingsImage 264Quad stream Camera SettingsStream Profiles Image AppearanceOverlay Image SettingsOverlay Image Go to Video & Audio Video Stream and select the Image tabGo to Events Action Rules Using Overlay Text in an Action RulePrivacy Mask Audio Input Video and Audio Audio SettingsAudio Modes Audio Output Audio ClipsDefault live view video Live View ConfigLive View Config Viewer Settings Default Viewer for BrowsersUser Defined Links Output ButtonsGo to Setup Live View Config Go to PTZ Preset Positions Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomPTZ Pan Tilt Zoom Guard Tour Device SettingsAdvanced LimitsOSD Menu Installing a PTZ driverDetectors DetectorsCamera Tampering Motion DetectionMotion Detection Parameters Set Up Motion Detection WindowsGo to Detectors Motion Detection Parameter Object Size History Sensitivity DescriptionAudio Detection Events EventsTime Setting Up an Action RulePTZ Control Go to Events Action Rules and click AddGo to Events Recipients and click Add RecipientsRecipient Use with action Schedules Setting Up an Email RecipientRecurrences Go to Events Schedules and click AddRecordings RecordingsRecording List Continuous RecordingLanguages LanguagesSystem Options System OptionsSecurity UsersGo to System Options Security Ieee IeeeCertificates Click Install certificate and upload the certificate To install a self-signed certificateDate & Time Audio SupportSystem Options Network Basic TCP/IP SettingsDNS Configuration Advanced TCP/IP SettingsNTP Configuration Host Name ConfigurationFTP NAT traversal port mapping for IPv4UPnPTM can be disabled under System Options Network UPnPTM QoS Quality of ServiceUPnPTM RTP/H.264Bonjour StorageSD Card Go to System Options Storage and click SD CardNetwork Share Ports & DevicesPorts COM PortSupport System Options MaintenanceSupport Overview System OverviewPlain Config Reset to Factory Default SettingsScripting File UploadAxis P7210 Video Encoder Troubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Basic Product is accessible locally but not externallyProblems with streaming H.264 Video and image problems, general Status and Network indicator LEDs are flashing red rapidlySetup Video & Audio Camera Settings SettingsStorage disruption Storage and disk management problemsRe-mount the storage device Reformat the SD card and then click MountTechnical Specifications Technical SpecificationsMemory Power Function/group Specifications System ApplicationConnectors WeightFunction Pin Specifications Technical Specifications ConnectorsPerformance Considerations RS-485/422 ConnectorAudio Input Audio Output Function PinAxis P7210 Video Encoder M3.8
Top Page Image Contents