1
1
2
To Install Batteries into iBaby™ (select models)
Requires 4 “AAA” Batteries (Notncluded)I .
1Use a Phillips screwdriver to remove the battery door.
2Place batteries in the compartment following polararity directions.
3 | Screw the battery door back onto the |
unit and replace the foam. |
To Attach Parent Tray
WARNING
DO NOT place more than 3 lbs.
(1.36 kg) in this tray to avoid tipping! DO NOT place hot liquids in this tray. Hot liquids can burn your child.
1Align tray holes with posts near handle and snap on.
TO REMOVE, pull each side up and out. For cleaning, parent tray is top rack dishwasher safe.
Install iBaby™ Sound System (select models)
WARNING
• Loud volume can damage your child’s hearing. When turning on music, gradually adjust the volume to a comfortable listening level so child is not startled.
•Do not place hot liquids in t his tray. Hot liquids can burn your child.
To attach iBaby™, align device over center
1compartment of iBaby™ parent tray. Push down to snap into place.
2To remove iBaby™, with one hand depress button on rear of device and
lift device up with other hand.
10