IEC Mains Connector, Ground Lift Switch

R E A R PA N E L

IEC MAINS CONNECTOR (9)

This is a standard IEC power connector. An AC mains cord having the appropriate AC plug and ratings for the intended operating voltage is included in the carton.

Never break off the ground pin on any equipment. It is provided for your safety. If the outlet used does not have a ground pin, a suitable grounding adapter should be used and the third wire should be grounded properly.To prevent the risk of shock or fire hazard, always make sure that the equalizer and all associated equipment is properly grounded.

Incorporated into this IEC MAINS CONNECTOR is the MAINS FUSE HOLDER. If for any reason you are unable to power up this unit, remove the fuse by pulling out the holder. Check to see if the fuse is operational. If not, then replace with a fuse of the appropriate value and rating. If the fuse continues to fail contact your nearest Certified Peavey Service Center.

GROUND LIFT SWITCH (10)

This will the lift circuit ground while keeping the Mains Safety Ground intact.This is useful when hum is present, and will maintain a safely operated unit.

XLR OUTPUT (11)

These male 3-pin connectors provide balanced output when used with female XLR connectors.

XLR INPUT (12)

These female 3-pin connectors provide balanced input when used with male XLR connectors.