Britax Diplomat manual

Contents Diplomat Page Table of Contents Death or Serious Injury can occur Page Safety Information Important NotesCertification RegistrationWeight Range Rear-Facing Forward-FacingMaximum Height Rear-Facing Rear-Facing Installation Installation AircraftAircraft Installation Forward-Facing InstallationFeatures Features Do not discard foam inserts found under the coverVehicle Safety Belts Vehicle CompatibilityVehicle Seating Positions Vehicle Buckle Position Latch connector Installation Rear FacingLatch Installation Under cover seeInstallation method Each Latch strap tight fig. ERemoval Lap/Shoulder Belt Installation Verify vehicle belt is not twisted, then buckle fig. CInstallation Rear Facing Lap-Belt Installation Do not install with non-locking ELR, 2-point vehicle beltInstallation Rear Facing Installation Forward Facing Installation Forward Facing 1Place child restraint forward facing on vehicle seat Removal Lap-Belt Installation Installation Versa-Tether Safety InformationTether to an approved anchor point Using the Versa-TetherTether strap into a V shape Pull Versa-Tether strap to remove all SlackRear-Facing Tether Connector Strap Energy-Absorbing Tether Switching the Latch Harness Follow instructions for restraint installation with LatchRestraint Functions Storing the Latch Connectors Recline AdjustmentChest Clip Fastening the Chest Clip Adjusting the Chest ClipInfant Body Pillow Releasing the Chest ClipReleasing the Harness Buckle Harness Buckle Fastening the Harness Buckle1Hold harness buckle with one hand Harness HeightSliding pieces apart fig. B Securing Your ChildSecuring Your Child Unfasten harness buckle by pressingHarness Height Adjustment 1Remove infant body pillow Care and MaintenanceCover Removal Refitting the CoverSponge Clean using warm water and mild soap Cleaning the Cover and PillowsCleaning the Shell Cleaning the HarnessHarness Buckle Removal Rethreading the Harness BuckleCleaning the Harness Buckle Warranty Limited ONE-YEAR WarrantyPage