Britax Diplomat manual Harness Buckle Removal, Rethreading the Harness Buckle

Page 37

Care and Maintenance

Harness Buckle Removal

1�Fully recline the child restraint.

2�Locate the metal-buckle strap

retainer on bottom of the restraint.

3�Pull retainer away from child restraint to loosen.

4�Turn the retainer so the short side will go through the slot in restraint shell.

5�Push the retainer through slots in the shell and cover, to the top of the restraint.

Rethreading the Harness Buckle

1�Locate slot in cover and shell for harness buckle.

2�Turn the buckle retainer so the short side will go through the slot in the cover and restraint shell.

3�Pull harness buckle away from restraint until tight, then verify the strap is not twisted and the release button is facing outward.

35

Image 37
Contents Diplomat Page Table of Contents Death or Serious Injury can occur Page Important Notes Safety InformationRegistration CertificationForward-Facing Weight Range Rear-FacingMaximum Height Rear-Facing Aircraft Installation Installation AircraftRear-Facing Installation Forward-Facing InstallationFeatures Do not discard foam inserts found under the cover FeaturesVehicle Compatibility Vehicle Safety BeltsVehicle Seating Positions Vehicle Buckle Position Latch Installation Installation Rear FacingLatch connector Under cover seeEach Latch strap tight fig. E Installation methodRemoval Verify vehicle belt is not twisted, then buckle fig. C Lap/Shoulder Belt InstallationInstallation Rear Facing Do not install with non-locking ELR, 2-point vehicle belt Lap-Belt InstallationInstallation Rear Facing Installation Forward Facing Installation Forward Facing 1Place child restraint forward facing on vehicle seat Removal Lap-Belt Installation Safety Information Installation Versa-TetherTether strap into a V shape Using the Versa-TetherTether to an approved anchor point Pull Versa-Tether strap to remove all SlackRear-Facing Tether Connector Strap Energy-Absorbing Tether Follow instructions for restraint installation with Latch Switching the Latch HarnessRestraint Functions Recline Adjustment Storing the Latch ConnectorsInfant Body Pillow Adjusting the Chest ClipChest Clip Fastening the Chest Clip Releasing the Chest Clip1Hold harness buckle with one hand Harness Buckle Fastening the Harness BuckleReleasing the Harness Buckle Harness HeightSecuring Your Child Securing Your ChildSliding pieces apart fig. B Unfasten harness buckle by pressingHarness Height Adjustment Cover Removal Care and Maintenance1Remove infant body pillow Refitting the CoverCleaning the Shell Cleaning the Cover and PillowsSponge Clean using warm water and mild soap Cleaning the HarnessRethreading the Harness Buckle Harness Buckle RemovalCleaning the Harness Buckle Limited ONE-YEAR Warranty WarrantyPage