Britax Diplomat manual Vehicle Seating Positions Vehicle Buckle Position

Page 13

Vehicle Compatibility

Vehicle Seating Positions

WARNING!Forward-facing vehicle seats MUST be used with this child restraint. Side-facing or rear-facing seats CAN- NOT be used. See diagram below.

Vehicle Buckle Position

WARNING! The position of vehicle belt buckle can affect stability of the child restraint. In a crash, an improperly positioned buckle could become loose and the child would be unprotected.

If buckle lies near position marked as wrong () when vehicle belt is tightened, try fitting child restraint in another seating position in vehicle.

If it is not possible to achieve correct position ( ) for buckle, another seating position MUST be used.

11

Image 13
Contents Diplomat Page Table of Contents Death or Serious Injury can occur Page Important Notes Safety InformationRegistration CertificationForward-Facing Weight Range Rear-FacingMaximum Height Rear-Facing Aircraft Installation Installation AircraftRear-Facing Installation Forward-Facing InstallationFeatures Do not discard foam inserts found under the cover FeaturesVehicle Compatibility Vehicle Safety BeltsVehicle Seating Positions Vehicle Buckle Position Latch Installation Installation Rear FacingLatch connector Under cover seeEach Latch strap tight fig. E Installation methodRemoval Verify vehicle belt is not twisted, then buckle fig. C Lap/Shoulder Belt InstallationInstallation Rear Facing Do not install with non-locking ELR, 2-point vehicle belt Lap-Belt InstallationInstallation Rear Facing Installation Forward Facing Installation Forward Facing 1Place child restraint forward facing on vehicle seat Removal Lap-Belt Installation Safety Information Installation Versa-TetherTether strap into a V shape Using the Versa-TetherTether to an approved anchor point Pull Versa-Tether strap to remove all SlackRear-Facing Tether Connector Strap Energy-Absorbing Tether Follow instructions for restraint installation with Latch Switching the Latch HarnessRestraint Functions Recline Adjustment Storing the Latch ConnectorsInfant Body Pillow Adjusting the Chest ClipChest Clip Fastening the Chest Clip Releasing the Chest Clip1Hold harness buckle with one hand Harness Buckle Fastening the Harness BuckleReleasing the Harness Buckle Harness HeightSecuring Your Child Securing Your ChildSliding pieces apart fig. B Unfasten harness buckle by pressingHarness Height Adjustment Cover Removal Care and Maintenance1Remove infant body pillow Refitting the CoverCleaning the Shell Cleaning the Cover and PillowsSponge Clean using warm water and mild soap Cleaning the HarnessRethreading the Harness Buckle Harness Buckle RemovalCleaning the Harness Buckle Limited ONE-YEAR Warranty WarrantyPage