Graco CLASSIC CONNECT 35, PD261464A manual Using Infant Restraint, Positioning Harness Straps

5.0 Using Infant Restraint

5.1 Positioning Harness Straps

FAILURE TO PROPERLY ADJUST THE HARNESS STRAPS FOR YOUR CHILD INCREASES THE RISK OF SERIOUS INJURY OR DEATH IN THE EVENT OF A SHARP TURN, SUDDEN STOP OR CRASH. The harness straps must be properly adjusted to fit your child according to the following instructions.

1.	Remove infant restraint from base and	™
	rotate handle down to sitting position.
	See “4.1 Adjusting Handle” and “4.2
	Removing and Attaching Infant Restraint”,
	page. 16.
2.	Place child in infant restraint as shown ™.
3.	Determine which pair of harness slots are	š
	even with or just below your child’s
	shoulders š. For infants 4-5 lbs.
	(1.8-2.3 kg) you must use the bottom
	slots and the 2-part body support, see
	page 18.

4.If the harness straps must be adjusted: remove child from infant restraint and move harness straps to the proper harness slots by doing the following:

Use harness slots

even with or just below

child’s shoulders

20