3M 1210 instruction manual Description

Page 1

Page 1 of 15 - June 2001

Description

Each unit includes the following items:

 

1

Electronic Pipettor

 

 

 

1

Charging Stand

charging stand

pipettor

 

1 AC Adapter

 

• 1 Test Performance Certificate

 

 

 

1

Instruction Manual

 

 

 

• 1

Quick Reference Card

 

 

 

• Replacement Tip Cone Filters (50/bag)

 

 

5mL

Make sure that all items are included

AC adapter

 

and that no damage has occurred during

 

 

 

 

shipment. Also check that the AC adapter matches your electrical requirements.

Pipettor Controls

These controls are often referred to in this manual.

Speed Key

Changes aspiration and dispense speeds

Mode Key

Shifts to next mode

Up Key

Increases open volume or speed

Down Key

Decreases open volume or speed

Recall Key

Flips back to last mode entered

Enter Key

Selects mode, speed or volume changes

Start Button

Triggers all mechanical operations

Tip Ejector Lever

Squeezed to remove pipette tip

ON-OFF SWITCH

The On-Off Switch is located at the back of the pipettor. Slide to the left position to switch "ON" and to the right to switch "OFF".

ON

OFF

FOD# 1210

keypad display

start button

tip ejector lever

tip ejector collar

tip cone

2

Image 1
Contents Description Indications Precautions3M Electronic Pipettor 5mL includes Charging the Pipettor Battery Connecting the AC AdapterInstructions For Use Condition Range or LimitMode Selection and Mode Recall Power on Display and StartupPipettor Programming Program MenuDilution 5mL Total Volume Dilution 1mL Total Volume Repeat Dispensing 1-5 repetitions of 1mL 1mL Pipetting Open Dilution Programming 5mL PipettingSpeed Selection Er 1 Display TroubleshootingBubbles Frozen DisplayCare and Maintenance Care and MaintenanceCleaning the Tip Cone Filter ReplacementCalibration Check Mode d1, 15, 5mL dilution Battery ReplacementCalibration Check Chart Pipettor Tips SpecificationsAccuracy and Precision TolerancesOut of Warranty Service Limited WarrantyLimitation of Remedies