4.1.12 Reloading the Default Settings
Sometimes it is very helpful to load the default settings. This can be simply done according to the following steps:
a)In MENU state press the UP or DOWN key until the parameter “Default Set” appears as shown in the Fig. 16(a) and 16(1).
b)Push the OK key to load default settings or MENU key to cancel this operation. After pressing OK key related parameters are set to default values (see Table 1). And then the system enters into preview state and some icons shows in the LCD as illustrated in Fig. 16(b).
Figure 16: Reloading Default Settings
(a) | (1) |
(b)
27