4.1.6 Setting Continuous Shooting Numbers
This parameter affects the number of pictures taken for each triggering in the camera mode and is effective and can be adjusted only when the device is set to the ON (Live) mode. It has three values: “1 Photo” (take 1 picture after triggered) and “2 Photo” (take 2 pictures with a certain interval after each triggering) and “3 Photo” (take 3 pictures with a certain interval after each triggering). Its default value is “1 Photo”. The following shows you how to set shooting numbers as “3 Photo” provided that the previous value is “1 Photo” in MENU state:
a)In MENU state push the UP or DOWN key until the parameter “Capture Number” appears as shown in the Fig. 10(a) and 10(1).
b)Push the RIGHT key two times. The value of this parameter will be changed to “3 Photo” and the value “3 Photo” is highlighted as shown in the Fig. 10(b) and 10(2).
c)Press OK key for saving setting or MENU key for canceling operation and exiting. After pressing the OK key the selected value will no longer be highlighted, shown in the Fig. 10(c) and 10(3). Figure 10: Setting Shooting Numbers
(a) | (1) |
(b) | (2) |
(c) | (3) |
19