1.4 Saving Images or Videos
The BUSHNELL TROPHY CAM uses a standard SD (Secure Digital) memory card to save images (in .jpg format) and videos (in .avi format). Before inserting the SD card into the card slot by opening the front cover, please make sure that the write-protect switch on the side of the card is “off” (NOT in the “Lock” position). SD cards up to a maximum 2GB capacity are supported. The following describes how to insert and remove the SD- card:
•When inserting the SD-card, please open the front cover, and then insert the SD-card into the card slot with its marked side upwards. The “click” sound of the card indicates that the card is connected successfully. If the wrong side of the card is facing up, you will not be able to insert it without force-there is only one correct way to insert cards.
•To take out the SD-card, just gently push in the card (do not try to pull it out without pushing in first). The card is released from the slot when you hear the click.
WARNING
Be sure the camera’s power is switched OFF before inserting or removing SD cards or batteries.
2Cautions
•The working voltage of the BUSHNELL TROPHY CAM is 6V. You can provide it with 4 or 8 AA batteries, or use an external 6V DC power supply (positive “tip” (inside) polarity).
•Please insert batteries as indicated, with the correct polarity positions.
•Please disable the write-protect before inserting the SD-card (make sure the card’s protect switch is not in the “Lock” position).
•The BUSHNELL TROPHY CAM has no internal memory for images or videos. Thus please insert a SD-card (with the camera’s power OFF) before testing. Otherwise, the camera can’t save images or videos. If no SD-card is inserted or the write-protect of the card is not disabled, the camera will shut down automatically after a long beep.