Samson GT60C, GT408 instruction

Setting Up and Using Your Hartke GT60 Guitar Amplifier

1.Remove all packing materials (save them in case of need for future service) and decide where the amplifier is to be physically placed. To avoid potential overheating problems, make sure that the rear panel is unobstructed and that there is good ventilation around the entire

unit.

ENGLISH

2. Before you plug-in the power cable, be sure the POWER switch is in the off (down) position. Connect the supplied power cable to the AC INLET located on the rear panel.

Then, plug-in the 3-pin AC plug into any grounded AC socket. Don’t turn the GT Series on just yet, though.

3.If you are using the GT60/408 PIGGYBACK connect the included speaker cable from the SPEAKER OUT located on the GT60’s rear panel to the INPUT on the rear of the HG408 speaker cabinet.

WARNING: The GT60 is to be used only when connect- ed to an 4 or 8 ohm speaker load. Use with speaker loads of less than 4 ohms can result in severe damage to the unit due to excessive heat and current limiting and will void your warranty!

4.Use a standard music instrument cable to connect your guitar to the INPUT jack on the front panel.

5.On the front panel of the GT Series, turn the CRUNCH and VOLUME on CHANNEL 1, and GAIN and VOLUME on CHANNEL 2 controls to their minimum (fully counterclockwise) position. Set the BASS, TREBLE and MID controls to their "5" position.

5.Press the front panel Power switch in order to turn on your GT Series amp; the switch will light up and you will see the tube heating up through the front panel window.

6.Press the front panel CHANNEL SWITCH to select CHANNEL 1. Note: If a footswitch is connected to the rear panel FOOTSWITCH input jack you will need to change the channel using the foot switch.

7.Set the output of your guitar to maximum and then, while playing, slowly turn the GT Series CHANNEL 1 VOLUME control up until the desired level is achieved. You will get a nice clean tone when using just VOLUME (no CRUNCH) for level, so set it to the level you like.

��

GT60C, GT60, GT408 specifications

The Samson GT408, GT60, and GT60C are renowned microphones designed for a variety of professional applications, showcasing advanced technology and superior sound quality that make them favorites among audio engineers and musicians alike.

The Samson GT408 is a compact, versatile microphone that excels in capturing vocals and instruments with clarity and precision. It features a cardioid pickup pattern that effectively isolates sound sources while minimizing background noise. This makes it ideal for live performances and studio recordings alike. One of its standout characteristics is its robust build quality, ensuring durability and reliability in various environments. The GT408 also boasts a frequency response that extends from 40 Hz to 18 kHz, allowing it to capture a wide range of sounds, from deep lows to crisp highs.

Moving on to the GT60, this microphone builds on the strengths of the GT408 by offering enhanced sensitivity and a broader frequency response. With a range of 20 Hz to 20 kHz, the GT60 captures the full spectrum of sound, making it perfect for vocalists and instrumentalists who require high fidelity in their recordings. The GT60 is also equipped with advanced shockmount technology that minimizes handling noise and vibrations, ensuring that the recorded sound remains clean and professional. Its versatile design allows it to be used in studio settings, live performances, and even broadcasting applications, making it a truly multifunctional tool.

The GT60C, a condenser model, takes the advancements of the GT60 further with its high-frequency response and smooth transient handling. Designed for studio use primarily, the GT60C features a large diaphragm that enhances sensitivity to soft sounds while maintaining clarity and detail. It effectively captures the nuances of vocals and acoustic instruments with exceptional warmth and depth. The microphone's built-in high-pass filter helps eliminate low-end rumble and unwanted noise, making it ideal for studio recordings.

All three models benefit from Samson's commitment to high-quality components and user-friendly design, ensuring that audio professionals can rely on these microphones for their performances and recordings. Whether for stage use or in the studio, the GT408, GT60, and GT60C offer unique features that cater to various audio needs, proving that Samson is a formidable name in the microphone industry. With their impressive characteristics and advanced technologies, these microphones not only enhance sound quality but also empower creativity in music and audio production.