JAI CV-M300 operation manual Specifications, Spectral Sensitivity

CV-M300

10. Specifications

Scanning system	CCIR 625 lines	EIA 525 lines
	25 frames/sec.	30 frames/sec.
CCD sensor	Monochrome 2/3" IT CCD
Sensing area	8.8 mm (h) x 6.6 mm (v)
Effective pixels	752 (h) x 582 (v)	768 (h) x 494 (v)
Elements in video output	737 (h) x 575 (v)	758 (h) x 486 (v)
Cell size	11.6 (h) x 11.2 (v) µm	11.6 (h) x 13.5 (v) µm
Resolution (horizontal)	560 TV lines	570 TV lines
Resolution (vertical)	575 TV lines	485 TV lines
Sensitivity on sensor		0.05 Lux
S/N ratio	>59 dB (AGC off, Gamma 1)
Video output	Composite VS signal 1.0 Vpp, 75 Ohm
Gamma		0.45 – 1.0
Gain	Manual – Automatic. 0 to +15 dB by potentiometer or AGC
Scanning	2:1 interlace – non-interlace
Accumulation		Field – frame
Synchronization	Int. X-tal. Ext HD/VD or random trigger
HD sync. input/output		4V, 75 Ohm*
VD sync. input/output		4V, 75 Ohm*
Trigger input		4V,TTL
Trigger input duration		>1HD
WEN output (write enable)		4V, 75 Ohm
EEN output (exposure enable)		4V, 75 Ohm
Pixel clock output (optional)		4V, 75 Ohm sine
Normal shutter	Off, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4500, 1/10,000 sec.
Edge pre-select shutter	1/5(1/60 EIA) 0, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4500, 1/10,000 sec.
Pulse width controlled shutter	>1 H (64 usec.) to <60 msec.
Start/stop trigger shutter	1/77 sec to 1/10,000 sec.
Long time exposure	1 field to ∞ . Duration between ext. VD pulses
Operating temperature		-5°C to +45°C
Humidity	20 – 80% non-condensing
Storage temp./humidity	-25°C to 60°C/20 - 90%
Power		12V DC ±10%. 3.6W
Lens mount		C-mount
Dimensions	40 x 50 x 80 mm (HxWxD)
Mass		230 g

*HD sync., VD sync./(Trigger) input or output by internal jumpers. Factory setting: HD/VD input. Inputs TTL or 75 Ohm terminated by internal DIP switch. Factory setting: 75 Ohm terminated.

Note: Above specifications are subject to change without notice.

10.1. Spectral Sensitivity

	1.0
response	0.8
	0.6
Relative	0.4
	0.2
	0.0
	400	500	600	700	800	900	1000

Wave length (nm)

- 20 -