JAI CV-M300 operation manual Table of Contents

CV-M300

Table of Contents

Table of Contents			.......................................................................................................................................	2
1.	General			3
2.	Standard Composition			3
3.	Main Features			3
4.	Locations and Functions			4
5.	Pin Assignment			5
	5.1.	12-pin Multi-connector (DC-IN/SYNC.)		5
	5.2.	6-pin Multi-connector (TRIGGER)		5
6.	Functions and Operations			6
	6.1.	Input/Output of HD/VD Signal		6
		6.1.1. Input of External HD/VD Signal		6
		6.1.2. Output of Internal HD/VD Signal		6
	6.2.	Normal Shutter Mode		6
	6.3.	External Trigger Mode		6
		6.3.1.	Edge Pre-select Mode	6
		6.3.2. Pulse Width Control Mode		8
		6.3.3.	Start/Stop Trigger Mode	10
		6.3.4. Long Time Exposure Mode		12
7.	Mode Setting		......................................................................................................................................	14
		7.1.1. SW1 Switch on the Rear Panel		14
		7.1.2. Table for SW 1 Setting		14
		7.1.3. Table for Shutter Time		14
		7.1.4. Ext. Trigger Shutter Mode		15
		7.1.5.	Trigger Select	15
		7.1.6.	CCD Accumulation	15
		7.1.7.	Scanning System	15
		7.1.8.	Gamma Correction	15
		7.1.9.	Gain Control	15
	7.2. SW2 on PK8057 Board			15
	7.3.	Jumper Settings		16
		7.3.1. Jumper on PK8041 Board		16
		7.3.2. Jumper on PK8042 Board		16
		7.3.3.	Pixel Clock Output	16
	7.4.	Location of SW2 and Jumpers		17
		7.4.1. Board PK8041 Side A		17
		7.4.2. Board PK8042 Side A		17
8.	Adjustment of Video Signal Output Level			18
9.	External Appearance			19
10.	Specifications			20
	10.1.	Spectral Sensitivity		20
11.	Appendix			21
	11.1.	Precautions		21
	11.2.	Typical CCD Characteristics		21
12.	User’s Record			22

- 2 -