Fujitsu RX600 S4 manual Comments… Suggestions… Corrections…

Page 2

Comments… Suggestions… Corrections…

The User Documentation Department would like to know your opinion of this manual. Your feedback helps us optimize our documentation to suit your individual needs.

Feel free to send us your comments by e-mail to manuals@fujtsu-siemens.com.

Certified documentation according to DIN EN ISO 9001:2000

To ensure a consistently high quality standard and user-friendliness, this documentation was created to meet the regulations of a quality management system which complies with the requirements of the standard DIN EN ISO 9001:2000.

cognitas. Gesellschaft für Technik-Dokumentation mbH www.cognitas.de

Copyright and Trademarks

Copyright © 2008 Fujitsu Siemens Computers GmbH.

All rights reserved. Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trade names and/or trademarks of their respective manufacturers.

Image 2

Contents Primergy RX600 S4 Server Comments… Suggestions… Corrections… Certified documentation according to DIN EN ISOContents Contents Documentation overview PrefaceConcept and target group of this manual Further sources of information Extensions and conversions Notational conventions Notational conventions Preface ServerView Remote ManagementProcedure Page Safety instructions Before starting upInstallation and operation Safety instructions Batteries Working with CDs/DVDs and CD/DVD drivesLaser information RX600 S4 Preparation Opening the serverRemoving the housing cover Opening the server PreparationMain memory Page Installing additional processors ProcessorsInstalling additional processors Removing the processor coverProcessors Removing the dummy heat sinkInstalling the processor Opening the socket leverInstalling the heat sink Fastening the heat sinkMounting the processor cover Mounting the processor coverReplacing a processor Removing the heat sinkInstalling the new processor Replacing a processorProcessors Page Removing the module frame Accessible drivesInstalling the CD/DVD drive Installing the CD/DVD drive Mounting a CD/DVD driveAccessible drives Mounting the drive in its frameConnecting a CD/DVD drive Installing a tape drive Installing a tape drive Module frame with sliding railsFastening the sliding rails on the drive Connecting the tape drive Mounting the tape driveCable routing from the tape to the PCI controller Page Installing controllers Controllers in non-hot-plug PCI slotsInstalling controllers Installing a controller in a non-hot-plug PCI slotBattery for the RAID5 controller Installing the battery iBBUInstalling the battery iBBU Position of the SAS riser card in the serverBattery for the RAID5 controller SAS riser card top and battery iBBU bottomPage Completion Closing the serverPage Abbreviations Abbreviations EMP IBBU LED RoMB PS/2RoHS SBE VRM Index RAID5