Hitachi hdc-401ex manual Using an SD Memory Card, Insert a memory card, Removing the Memory Card

■ Using an SD Memory Card

Also, see SD Memory Card P8 .

SD memory cards (sold separately) can be used with the HDC-401EX （32, 64, 128, 256 and 512 MB compatible）.

Images can be captured without an SD memory card, as the camera has an internal 16 MB flash memory.

Copying Images in the Internal Memory to the SD Memory Card P65 is also possible.

●For a reference on the possible number of shots and recording time, see

■ Specifications: Number of Recordable Images/Recording Time and Data Size P97 .

●The SD memory card is hereinafter referred to as the“memory card.”

●If a memory card is used the memory card will be given priority, thus preventing the camera from recording to its internal memory or erasing images from the internal memory.

●Turn off the power before replacing the memory card.

1	Open the battery/SD memory card cover by
	sliding it in the direction of the arrow.

2 Label face Insert a memory card.

Insert the card securely in the direction shown until you hear it“click”into place.

3 Close the battery/SD memory card cover.

Removing the Memory Card

Open the battery/SD memory card cover and press the memory card once to remove the card.

Press it once.

Write-Protecting the Memory Card

LOCK	LOCK
Write-protect tab	Write-protected

Each memory card has a write-protect switch. If the write-protect switch is locked, the message Card Locked! is displayed on the LCD monitor. In this condition normal data capture or deletion cannot be performed.

●If you want to use a memory card that has been formatted in another digital camera or computer, format the card in the HDC-401EX before use. See Formatting P74 .

●If you are using a memory card, also read the user manual for the memory card.

Basic Operations Getting Ready

23 24