FujiFilm DL-290S owner manual Effective flash range, Taking ordinary pictures

Page 18

■Effective flash range

(Using color negative film; distance in meters). The effective range of your camera’s built-in flash will differ with the speed of the film you are using and the lens focal length as shown below.

	ISO 100	ISO 200	ISO 400

38 mm wideangle	0.9 ~ 5	0.9 ~ 7	0.9 ~ 10

90 mm telephoto	0.65 ~ 2.2	0.65 ~ 3.3	0.65 ~ 4.4

(Using colour negative film: units; m)

		Taking ordinary pictures
		1. Automatic-flash mode in low light (Fig. 24)
	Fig. 24	1. Automatic-flash mode in low light (Fig. 24)
	Fig. 24	If you don’t see any sign in area “A” of the LCD (see


		illustration) and the light is low, the Flash will
		automatically fire when you press down the Shutter
		Release. And as soon as the blinking Flash Sign (c)
		in the LCD turns off, you can take your next
		autoflash picture.

18

Image 18

Contents OWNER,S Manual Special Features ContentsNames of Parts Basic Procedure Open the battery compartment cover FigInsert the battery Fig Using the Data or Time Printing Unit Check the loaded battery FigPrinting dates or time on your pictures Fig Year Month Day Month Day Year Day Month Year Day Hour Minute Attach the Strap Fig Open the camera back Fig Insert the film FigCheck the film tip position Fig Close the camera back FigTurn on the power Fig Standard 35 mm size covering area FigZooming to telephoto Fig Zooming to wideangle FigHold the camera still Fig Press the shutter release about halfway down Fig Take your picture FigEND of Film After exposing the last frame Fig Unload the exposed film FigUnloading the film in mid-roll Fig This is the picture you want but.... FigSelecting the Exposure Mode Move the camera slightly and.... FigWord on the camera’s flash exposure modes Automatic-flash mode in low light Fig Effective flash rangeTaking ordinary pictures Beautiful Red-eye reducing mode FigIf you want your subject’s eyes to look natural Word on red-eye effectTaking non-flash pictures Flash off mode Fig Set the self-timer Fig Start the Self-timer FigUsing the Remote Control Switch Take out the remote control switch FigWait 10 seconds Set the camera to remote control Fig Take your remote control picture FigEffective switch range Fig Camera FAULTS, Possible CAUSES, and Remedies Faults Possible Causes RemediesFaults Possible Causes Remedies Print FAULTS, Possible CAUSES, and Remedies Faults Possible Causes Remedies Camera Care and Cautions Specifications Remote Control Switch Self-timerPower Source OthersFGS-991102-Ci-01