FujiFilm DL-290S Set the camera to remote control Fig, Take your remote control picture Fig

Page 23

Fig. 32

Fig. 33

2.Set the camera to remote control (Fig. 32)

Press in the Self-timer/Remote Control Mode Button ( r) to bring out the triangular mark (t) in the LCD in the spot where the Remote Control Sign

( ) is showing.

3. Take your remote control picture (Fig. 33)

Aim the Autofocus Spot at your subject and compose your picture. Face the Switch Muzzle toward the camera and press down the Shutter Operating Button. The Self-timer/Remote Control Lamp will blink for two seconds then the shutter will trip to take your picture.

●After taking your picture, switch the camera off the remote control mode.

●Take your picture within five minutes after setting the camera to the remote control mode.

●For best results, mount the camera on a tripod when taking remote control pictures.

23

Image 23

Contents OWNER,S Manual Contents Special FeaturesNames of Parts Insert the battery Fig Basic ProcedureOpen the battery compartment cover Fig Printing dates or time on your pictures Fig Using the Data or Time Printing UnitCheck the loaded battery Fig Year Month Day Month Day Year Day Month Year Day Hour Minute Attach the Strap Fig Insert the film Fig Open the camera back FigClose the camera back Fig Check the film tip position FigStandard 35 mm size covering area Fig Turn on the power FigZooming to wideangle Fig Zooming to telephoto FigHold the camera still Fig Take your picture Fig Press the shutter release about halfway down FigEND of Film Unload the exposed film Fig After exposing the last frame FigThis is the picture you want but.... Fig Unloading the film in mid-roll FigWord on the camera’s flash exposure modes Selecting the Exposure ModeMove the camera slightly and.... Fig Taking ordinary pictures Automatic-flash mode in low light FigEffective flash range Word on red-eye effect Red-eye reducing mode FigIf you want your subject’s eyes to look natural BeautifulTaking non-flash pictures Flash off mode Fig Start the Self-timer Fig Set the self-timer FigWait 10 seconds Using the Remote Control SwitchTake out the remote control switch Fig Take your remote control picture Fig Set the camera to remote control FigEffective switch range Fig Faults Possible Causes Remedies Camera FAULTS, Possible CAUSES, and RemediesFaults Possible Causes Remedies Print FAULTS, Possible CAUSES, and Remedies Faults Possible Causes Remedies Camera Care and Cautions Specifications Others Self-timerPower Source Remote Control SwitchFGS-991102-Ci-01