FujiFilm DL-290S owner manual Using the Data or Time Printing Unit, Check the loaded battery Fig

Page 5

Fig. 3

Fig. 4

3. Check the loaded battery (Fig. 3)

Push the Lens Cover Button downward. If the Lens Cover opens and the lens barrel moves out into shooting position (wideangle), the battery is loaded correctly.

●If the Flash Sign ( c ) in the LCD blinks for 12 seconds or more after taking a flash picture, the battery is spent. Change the battery with a new one as soon as possible.

●Always reset the date after changing the battery (for the dating model only)

●If you are going on a trip or are planning to take lots of pictures, take a spare battery along with you just in case you might need it. This is especially true if you are travelling abroad because in some countries you may not be able to obtain the type of battery you want.

USING THE DATA (OR TIME) PRINTING UNIT

This section applies only to the model with a dating unit.

1.Printing dates (or time) on your pictures (Fig. 4)

M... Stands for month (Fig. 4 - A)

5

Image 5

Contents OWNER,S Manual Contents Special FeaturesNames of Parts Insert the battery Fig Basic ProcedureOpen the battery compartment cover Fig Printing dates or time on your pictures Fig Using the Data or Time Printing UnitCheck the loaded battery Fig Year Month Day Month Day Year Day Month Year Day Hour Minute Attach the Strap Fig Insert the film Fig Open the camera back FigClose the camera back Fig Check the film tip position FigStandard 35 mm size covering area Fig Turn on the power FigZooming to wideangle Fig Zooming to telephoto FigHold the camera still Fig Take your picture Fig Press the shutter release about halfway down FigEND of Film Unload the exposed film Fig After exposing the last frame FigThis is the picture you want but.... Fig Unloading the film in mid-roll FigWord on the camera’s flash exposure modes Selecting the Exposure ModeMove the camera slightly and.... Fig Taking ordinary pictures Automatic-flash mode in low light FigEffective flash range If you want your subject’s eyes to look natural Red-eye reducing mode FigBeautiful Word on red-eye effectTaking non-flash pictures Flash off mode Fig Start the Self-timer Fig Set the self-timer FigWait 10 seconds Using the Remote Control SwitchTake out the remote control switch Fig Take your remote control picture Fig Set the camera to remote control FigEffective switch range Fig Faults Possible Causes Remedies Camera FAULTS, Possible CAUSES, and RemediesFaults Possible Causes Remedies Print FAULTS, Possible CAUSES, and Remedies Faults Possible Causes Remedies Camera Care and Cautions Specifications Power Source Self-timerRemote Control Switch OthersFGS-991102-Ci-01