FujiFilm DL-290S owner manual Set the self-timer Fig, Start the Self-timer Fig

Page 21

Fig. 28 USING THE SELF-TIMER

Fig. 29

1. Set the self-timer (Fig. 28)

To set the Self-timer, press in the Self-timer/ Remote Control Button ( r) to bring out the triangular mark (t) in the LCD in the spot where the Self- timer Sign (r) is showing.

2. Start the Self-timer (Fig. 29)

To start it, press down the Shutter Release. The Lens will automatically focus on the part of your subject that is covered by the Finder’s Autofocus Spot.

●When you start the Self-timer, do not stand in front of the camera. If you do, you will either throw the Lens out of focus or the picture may turn out underexposed.

●The Self-timer has to be reset each time you take a picture.

●To switch off the Self-timer, turn off the triangular mark (t) in the LCD by pressing in the Self- timer Button a second time.

21

Image 21

Contents OWNER,S Manual Contents Special FeaturesNames of Parts Basic Procedure Open the battery compartment cover FigInsert the battery Fig Using the Data or Time Printing Unit Check the loaded battery FigPrinting dates or time on your pictures Fig Year Month Day Month Day Year Day Month Year Day Hour Minute Attach the Strap Fig Insert the film Fig Open the camera back FigClose the camera back Fig Check the film tip position FigStandard 35 mm size covering area Fig Turn on the power FigZooming to wideangle Fig Zooming to telephoto FigHold the camera still Fig Take your picture Fig Press the shutter release about halfway down FigEND of Film Unload the exposed film Fig After exposing the last frame FigThis is the picture you want but.... Fig Unloading the film in mid-roll FigSelecting the Exposure Mode Move the camera slightly and.... FigWord on the camera’s flash exposure modes Automatic-flash mode in low light Fig Effective flash rangeTaking ordinary pictures If you want your subject’s eyes to look natural Red-eye reducing mode FigBeautiful Word on red-eye effectTaking non-flash pictures Flash off mode Fig Start the Self-timer Fig Set the self-timer FigUsing the Remote Control Switch Take out the remote control switch FigWait 10 seconds Take your remote control picture Fig Set the camera to remote control FigEffective switch range Fig Faults Possible Causes Remedies Camera FAULTS, Possible CAUSES, and RemediesFaults Possible Causes Remedies Print FAULTS, Possible CAUSES, and Remedies Faults Possible Causes Remedies Camera Care and Cautions Specifications Power Source Self-timerRemote Control Switch OthersFGS-991102-Ci-01