Fig. 9
Fig. 10
3. Check the film tip position (Fig. 9)
Make sure the film tip falls within the Film Tip Mark (green lines in the far end of the film track).
4. Close the camera back (Fig. 10)
As soon as you close the Camera Back, the Exposure Counter will run though rapidly and the film will prewind itself up to the very end. (If the film is a
●If the film leader (the length of film protruding from the cartridge) is too short or too long, however, you’ll have to adjust it before dropping the cartridge into the camera. To adjust, pull the film out or wind it in so that the film tip will fall within the camera’s Film Tip Mark (green lines).
●The Film Confirmation Window will show the type and speed of the loaded film and the number of exposures it contains.
9