FujiFilm DL-290S Press the shutter release about halfway down Fig, Take your picture Fig

Page 13

Fig. 17

Fig. 18

7.Press the shutter release about halfway down (Fig. 17)

If the Autofocus Lamp (green lamp next to the Finder Eyepiece) turns on and glows when the Shutter Release is pressed about halfway down, the Lens has completed focusing. But if you are too close to your subject, the Autofocus Lamp will blink to warn you to move back.

●The Autofocus Lamp will blink if you are too close to your subject. If it blinks, check the camera-to- subject distance once again.

●When you press the Shutter Release about halfway down, do it slowly and gently.

8. Take your picture (Fig. 18)

To take your picture, press the Shutter Release gently all the way down. As soon as the shutter trips, the film will automatically advance into position for the next shot.

●The number in the film counter decreases by one each time a frame is exposed.

●The AF lamp (or self-timer Lamp) will extinguish once and reappear immediately after the shutter is released.

●The shooting distance is 0.65 m - ∞ at f=90 mm (0.9 m - ∞ at other focal lengths).

13

Image 13

Contents OWNER,S Manual Contents Special FeaturesNames of Parts Open the battery compartment cover Fig Basic ProcedureInsert the battery Fig Check the loaded battery Fig Using the Data or Time Printing UnitPrinting dates or time on your pictures Fig Year Month Day Month Day Year Day Month Year Day Hour Minute Attach the Strap Fig Insert the film Fig Open the camera back FigClose the camera back Fig Check the film tip position FigStandard 35 mm size covering area Fig Turn on the power FigZooming to wideangle Fig Zooming to telephoto FigHold the camera still Fig Take your picture Fig Press the shutter release about halfway down FigEND of Film Unload the exposed film Fig After exposing the last frame FigThis is the picture you want but.... Fig Unloading the film in mid-roll FigMove the camera slightly and.... Fig Selecting the Exposure ModeWord on the camera’s flash exposure modes Effective flash range Automatic-flash mode in low light FigTaking ordinary pictures If you want your subject’s eyes to look natural Red-eye reducing mode FigBeautiful Word on red-eye effectTaking non-flash pictures Flash off mode Fig Start the Self-timer Fig Set the self-timer FigTake out the remote control switch Fig Using the Remote Control SwitchWait 10 seconds Take your remote control picture Fig Set the camera to remote control FigEffective switch range Fig Faults Possible Causes Remedies Camera FAULTS, Possible CAUSES, and RemediesFaults Possible Causes Remedies Print FAULTS, Possible CAUSES, and Remedies Faults Possible Causes Remedies Camera Care and Cautions Specifications Power Source Self-timerRemote Control Switch OthersFGS-991102-Ci-01