FujiFilm DL-290S owner manual Year Month Day Month Day Year Day Month Year Day Hour Minute

Page 6

↓

Year Month Day

↓

Month Day Year

↓

Day Month Year

↓

Day Hour Minute

↓

To change the order of the year, month, and day, press in the Date Mode/Select Button q. The order will change as shown above. The date Showing in the Date Display Window is the date that will be printed in the bottom right of your picture.

If you don’t want dates on your pictures, bring out the Dating Unit Off sign (-- -- --) in the Date Display Window.

lAfter changing the Camera battery, always check and reset the date (or time).

Fig. 5

2.Correcting the date (Fig. 5) PRINT... Printing Mark (Fig. 5 - A)

(1)Make the number for the year blink by pressing in the Date Mode/Select Button q.

(2)Change the blinking number to the one you want by pressing in the Date Set Button w.

(3)Make the next number (the number for the month) blink by pressing in the Date Mode/

6

Image 6

Contents OWNER,S Manual Special Features ContentsNames of Parts Basic Procedure Open the battery compartment cover FigInsert the battery Fig Using the Data or Time Printing Unit Check the loaded battery FigPrinting dates or time on your pictures Fig Year Month Day Month Day Year Day Month Year Day Hour Minute Attach the Strap Fig Open the camera back Fig Insert the film FigCheck the film tip position Fig Close the camera back FigTurn on the power Fig Standard 35 mm size covering area FigZooming to telephoto Fig Zooming to wideangle FigHold the camera still Fig Press the shutter release about halfway down Fig Take your picture FigEND of Film After exposing the last frame Fig Unload the exposed film FigUnloading the film in mid-roll Fig This is the picture you want but.... FigSelecting the Exposure Mode Move the camera slightly and.... FigWord on the camera’s flash exposure modes Automatic-flash mode in low light Fig Effective flash rangeTaking ordinary pictures Beautiful Red-eye reducing mode FigIf you want your subject’s eyes to look natural Word on red-eye effectTaking non-flash pictures Flash off mode Fig Set the self-timer Fig Start the Self-timer FigUsing the Remote Control Switch Take out the remote control switch FigWait 10 seconds Set the camera to remote control Fig Take your remote control picture FigEffective switch range Fig Camera FAULTS, Possible CAUSES, and Remedies Faults Possible Causes RemediesFaults Possible Causes Remedies Print FAULTS, Possible CAUSES, and Remedies Faults Possible Causes Remedies Camera Care and Cautions Specifications Remote Control Switch Self-timerPower Source OthersFGS-991102-Ci-01