FujiFilm DL-290S owner manual Attach the Strap Fig

Page 7

Select Button again then correct the number with the Date Set Button.

(4)After correcting the number for the “minute”, press in the Date Mode/Select Button to bring out the “PRINT” sign in the Date Display Window. The Dating Unit is now ready for printing.

●Your camera’s quartz date-printing unit has an auto-calendar that is designed to function up through the year 2020. The Dates (or time) are represented by the following numbers:

Year:	89 - 20	Hour:	0 - 23
Month:	1 - 12	Minute:	00 - 59
Day:	1 - 31

● The year, month, and day are interlocked with the

			hour and minute.
		●	When the shutter is released to take your picture,
	Fig. 6	●	When the shutter is released to take your picture,
	Fig. 6		the “PRINT” sign in the Date Display Window will


			blink for about two seconds to tell you the date
			has been printed on it.

ATTACH THE STRAP (Fig. 6)

Pass the looped end of the strap through the camera’s Strap Lug, then pass the other end of the strap through the loop and pull it firmly.

7

Image 7

Contents OWNER,S Manual Contents Special FeaturesNames of Parts Open the battery compartment cover Fig Basic Procedure Insert the battery Fig Check the loaded battery Fig Using the Data or Time Printing UnitPrinting dates or time on your pictures Fig Year Month Day Month Day Year Day Month Year Day Hour Minute Attach the Strap Fig Insert the film Fig Open the camera back FigClose the camera back Fig Check the film tip position FigStandard 35 mm size covering area Fig Turn on the power FigZooming to wideangle Fig Zooming to telephoto FigHold the camera still Fig Take your picture Fig Press the shutter release about halfway down FigEND of Film Unload the exposed film Fig After exposing the last frame FigThis is the picture you want but.... Fig Unloading the film in mid-roll FigMove the camera slightly and.... Fig Selecting the Exposure ModeWord on the camera’s flash exposure modes Effective flash range Automatic-flash mode in low light FigTaking ordinary pictures Word on red-eye effect Red-eye reducing mode FigIf you want your subject’s eyes to look natural BeautifulTaking non-flash pictures Flash off mode Fig Start the Self-timer Fig Set the self-timer FigTake out the remote control switch Fig Using the Remote Control SwitchWait 10 seconds Take your remote control picture Fig Set the camera to remote control FigEffective switch range Fig Faults Possible Causes Remedies Camera FAULTS, Possible CAUSES, and RemediesFaults Possible Causes Remedies Print FAULTS, Possible CAUSES, and Remedies Faults Possible Causes Remedies Camera Care and Cautions Specifications Others Self-timerPower Source Remote Control SwitchFGS-991102-Ci-01