Yamaha RX-V363 owner manual 12 En, Connecting to the Front a terminals

Page 16

Connections

■Connecting to the FRONT A terminals

2

1

Red: positive (+)

 

 

Black: negative (–)

 

3

1Loosen the knob.

2Insert the bare end of the speaker wire into the slit on the terminal.

3Tighten the knob to secure the wire.

Connecting the banana plug

(except Europe, Russia, Korea, and Asia models)

The banana plug is a single-pole electrical connector widely used to terminate speaker cables. First, tighten the knob and then insert the banana plug connector into the end of the corresponding terminal.

Banana plug

■Connecting to the FRONT B, CENTER, and SURROUND terminals

Red: positive (+)

Black: negative (–)

1Press down the tab.

2Insert the bare end of the speaker wire into the hole on the terminal.

3Release the tab to secure the wire.

Setting the speaker impedance (U.S.A. and Canada models only)

Caution

If you are to use 6 ohm speakers, set “SP IMP.” to “6ΩMIN” as follows BEFORE using this unit.

1Make sure this unit is turned off.

See page 19 for details about turning on or off this unit.

2Press and hold J TONE CONTROL and then press A STANDBY/ON to turn on this

unit.

This unit turns on, an the advanced setup menu appears in the front panel display.

3Press K PROGRAM l / h repeatedly to select “SP IMP.”.

The following display appears in the front panel display.

SP IMP.- 8 MIN

4Press L STRAIGHT repeatedly to select “6ΩMIN”.

The following display appears in the front panel display.

SP IMP.- 6 MIN

5Press A STANDBY/ON to confirm your selection and set this unit to the standby mode.

Note

The setting you made is reflected next time you turn on this unit.

12 En

Page 15 Page 17
Image 16
Page 15 Page 17
Contents RX-V363 Important Safety Instructions FCC Information for US customers Example of Antenna GroundingPour LES Consommateurs Canadiens For Canadian CustomersSerial No Contents Features We Want You Listening For a LifetimeChecking the supplied accessories Installing batteries in the remote controlGetting started Asia and General models onlySet up your speakers Quick start guidePreparation Check the items Enjoy DVD playbackCenter and surround speakers Front speakersConnect the subwoofer cable to the input Make sure that this unit and the DVD For further connectionsPlayer are unplugged from the AC wall outlets Using the other Scene buttons Rotate H Volume to adjust the volumeAbout Scene function Check the type of the connected speakersWhat do you want to do with this unit? Rear panel ConnectionsName See Placing speakers 10 EnBefore connecting to the Speakers Terminal Connecting speakers11 En Connecting to the Front B, CENTER, and Surround terminals Connecting to the Front a terminals12 En Information on jacks and cable plugs 13 EnAudio jacks Video jacksInformation on Hdmi 14 EnHdmi jack and cable plug Hdmi cable plug15 En Connecting video componentsDVD player Connecting to the Hdmi or Component Video jacks Connecting to the Component Video jacks16 En Hdmi connectionConnecting audio components Connecting a CD player and a CD recorder/MD recorderConnecting to the Multi CH Input jacks 17 EnConnecting to the Video AUX jacks on the front panel 18 EnConnecting the FM and AM antennas Connecting the power cableTurning on and off the power 19 EnFront panel display 20 EnUsing the remote control 21 En1Infrared window 30ºSPEAKERS..5spk Basic setup22 En Press 7l/ h to select the desired setting Press Hmenu to exit from Basic SetupCHECKTestTone 23 EnSelecting the Scene templates Selecting the desired Scene templateD M o v i e V i e w D V i e w i n g25 En Which Scene template would you like to select?Preset Scene template descriptions 26 EnCustomizing the preset Scene Templates Creating your original Scene templates27 En Renaming the Scene templatesUsing remote control on the Scene feature Controlling the input source Components in the Scene mode28 En Scene buttonsGuide to contents PlaybackBasic operations V i e D r a m a t i cAdditional operations 30 EnSelecting the night listening mode Adjusting the tonal quality31 En Selecting audio input jacksAdjusting speaker levels during Playback Displaying the signal informationPress 4AMP and then press Hmenu on the remote control 32 EnUsing the sleep timer 33 EnPlaying video sources Background Audio sourcesCategory Program Features Sound field programsSound field program descriptions 34 En35 En Editing sound fields parameters36 En Enjoying unprocessed input sources Straight decoding modeTo deactivate the Straight mode, press FM/AM tuning Automatic tuningManual tuning AM 1440 kHzAutomatic preset tuning Manual preset tuningC3AM 630 kHz 38 EnSelecting preset stations Exchanging preset stationsPress and hold B PRESET/TUNING for more than 3 seconds E1FM 87.5 MHz40 En Using iPodAUX/DOCK Using Bluetooth components Pairing by using SET MenuQuick pairing 41 EnRecording 42 EnBasic setup Basic Setup Manual setup Manual SetupParameter Features Set menuUsing set menu Signal information Signal Info44 En 8RETURNSpeaker settings Aspeaker SET 45 En46 En Speaker level BSP Level100Hz 47 En48 En Audio settings Gaudio SETInput assignment Multi channel input setup DVD My DVD49 En BGV BGVDisplay settings Adisplay SET Bluetooth setting Ebluetooth50 En Parameter initialization DPARAM. INIRemote control features Controlling this unit, a TV, or other components51 En Controlling this unitRemote control Player/recor 52 EnControlling other components Digital TVSetting remote control codes Resetting all remote control codesRemote control code default settings 53 EnAdvanced setup Initializing Preset54 En Speaker impedance SP IMP A. and Canada models onlyTroubleshooting Problem Cause Remedy See55 En General56 En 57 En TunerBluetooth 58 EnIPod Status message Cause Remedy SeeRemote control Resetting the systemAdvanced setup menu appears in the front panel display 59 En60 En GlossaryAudio information 61 En Sound field program informationVideo information Cinema DSPSpecifications 62 En63 En IndexNumerics 64 En IPod connectedFront panel C D E F G H10 ENT List of remote control codes IiiCCE NEI TV/DVD TV/DVD/VCRTV/VCR VCRWN25860 RX-V363 Front panel/Face avantRemote control/Boîtier de télécommande
Related manuals
Manual 76 pages 22.92 Kb

RX-V363 specifications

The Yamaha RX-V363 is a versatile and powerful AV receiver that caters to home theater enthusiasts looking for quality sound and advanced features. Known for its reliability and performance, the RX-V363 brings together an impressive mix of technologies that enhance both audio and visual experiences in the comfort of your home.

One of the standout features of the RX-V363 is its 5.1-channel surround sound capability, which allows you to enjoy immersive audio experiences. With a power output of 100 watts per channel, this receiver fills your space with rich sound and clarity, making it ideal for movies, music, and gaming. The design incorporates Yamaha’s renowned YPAO (Yamaha Parametric room Acoustic Optimizer) technology. This automatic calibration system analyzes the acoustics of your room and optimizes the sound settings accordingly, ensuring that every listener enjoys the best possible audio experience.

Connectivity is another strong point for the RX-V363. It features multiple HDMI inputs, which support high-definition audio and video signals, along with component and composite video inputs. The receiver is also equipped with digital audio inputs for both optical and coaxial sources, promoting seamless integration with various devices such as Blu-ray players, gaming consoles, and streaming devices.

In addition to its advanced audio capabilities, the RX-V363 supports Dolby Digital and DTS decoding, providing authentic surround sound for cinematic experiences. The receiver also includes Yamaha's proprietary Cinema DSP technology, which enables the reproduction of real-world acoustic environments, enhancing the realism of movie soundtracks and music playback.

The RX-V363 is designed with user convenience in mind, featuring an intuitive user interface and an easy-to-navigate on-screen display. The provided remote control gives users effortless access to adjust settings and preferences. The compact and stylish design of the AV receiver ensures it fits well in any home theater setup.

Summarily, the Yamaha RX-V363 combines powerful audio performance with advanced features and user-friendly controls, making it an excellent choice for those seeking to elevate their home entertainment experience. With its impressive audio capabilities, versatile connectivity options, and features like YPAO and Cinema DSP, the RX-V363 stands out as a reliable option for anyone looking to enhance their media consumption.
Top Page Image Contents