Selecting preset stations
You can tune into any desired station simply by selecting the preset station group and number under which it was stored.
y
When performing this operation with the remote control, press 3TUNER to select “TUNER” as the input source.
1Press D A/B/C/D/E (or 7A/B/C/D/E l/ h) repeatedly to select the desired preset station group (A to E).
The preset station group letter appears in the front panel display and changes each time you press the button.
2Press E PRESET/TUNING l / h (or
7PRESET/CH k / n) to select the desired preset station number (1 to 8).
The preset station group and number appear in the front panel display along with the station band and frequency.
E1:FM 87.5 MHz
y
You can select the desired preset station number (1 to 8) directly by pressing the numeric buttons (N).
FM/AM tuning
Exchanging preset stations
You can exchange the assignments of two preset stations with each other. The example below describes the procedure to exchange preset station “E1” with “A5”.
1Select preset station “E1” using D A/B/C/D/E and E PRESET/TUNING l / h.
See “Selecting preset stations” on this page.
2Press and hold B PRESET/TUNING for more than 3 seconds.
“E1” and the MEMORY indicator flash in the front panel display.
Flashes
MEMORY
E1:FM 87.5 MHz
Flashes
3Select preset station “A5” using
D A/B/C/D/E and E PRESET/TUNING l / h.
“A5” and the MEMORY indicator flash in the front panel display.
See “Selecting preset stations” on this page.
Flashes
MEMORY
A5:FM 90.5 MHz
Flashes
4Press B PRESET/TUNING again.
“EXCHANGE
OPERATION | BASIC |
|
|
English