Yamaha RX-V363 owner manual 35 En, Editing sound fields parameters

■Selecting decoders for 2-channel

sources (surround decode mode)

Signals input from 2-channel sources can also be played back on multi-channels.

Press 4AMP and then press LSUR. DECODE repeatedly to select a decoder.

You can select from the following decoders depending on the type of source you are playing and your personal preference.

STANDARD	Functions
PRO LOGIC	Dolby Pro Logic processing for any
	sources
PLII Movie	Dolby Pro Logic II processing for
	movie sources
PLII Music	Dolby Pro Logic II processing for
	music sources
PLII Game	Dolby Pro Logic II processing for
	game sources

■Editing sound fields parameters

You can enjoy good quality sound with the factory default parameters. Although you do not have to change the initial settings, you can change some of the parameters to better suit the input source or your listening room.

1While listening to a source, press 4AMP and then press 7k / n to select the desired parameter.

2Press 7l/ h to change the parameter value.

Note

You cannot change parameter values when “MEM.GUARD” in “OPTION MENU” is set to “ON” (see page 50).

Sound field programs

y

Initial settings are indicated in bold under each parameter.

For Pop/Rock, Hall, Jazz, Game, TV Sports, Movie Spacious and Movie Dramatic:

DSP level	DSP LEVEL
Function:		Adjusts the effect level.
Choices:		MIN, MID, MAX
For PRO LOGIC II Music:
Panorama	PANORAMA
Function:		Sends stereo signals to the surround
		speakers as well as the front speakers
		for a wraparound effect.
Choices:		OFF, ON
Dimension		DIMENSION
Function:		Gradually adjusts the sound field
		either towards the front or towards the
		rear.
Control range:		–3 (towards the rear) to +3 (towards
		the front), initial setting is STD
		(standard).
Center width		CT WIDTH
Function:		Adjusts the center image from all
		three front speakers to varying
		degrees. A larger value adjusts the
		center image towards the front left and
		right speakers.
Control range:		0 (center channel sound is output only
		from center speaker) to 7 (center
		channel sound is output only from
		front left and right speakers), initial
		setting is 3.
For Music Enh. 2ch and Music Enh. 5ch
Effect level		EFCL LVL
Function:		Adjusts the effect level.
Choices:		LOW, HIGH

OPERATION BASIC

English

35 En