Yamaha RX-V363 owner manual 58 En, IPod, Bluetooth, Status message Cause Remedy See

Troubleshooting

■iPod

Note

In case of a transmission error without a status message appearing in the front panel display, check the connection to your iPod (see page 18).

Status message	Cause	Remedy	See
			page
Connect error	There is a problem with the signal path	Turn off this unit and reconnect the Yamaha iPod	18
	from your iPod to this unit.	universal dock to the DOCK terminal of this unit.
		Try resetting your iPod.	—
Unknown iPod	The iPod being used is not supported by	Only iPod (Click and Wheel), iPod nano, and iPod	—
	this unit.	mini are supported.
iPod connected	Your iPod is properly stationed in a
	Yamaha iPod universal dock (such as
	YDS-10, sold separately) connected to the
	DOCK terminal of this unit, and the
	connection between your iPod and this
	unit is complete.

Disconnected	Your iPod was removed from a Yamaha
	iPod universal dock (such as YDS-10,
	sold separately) connected to the DOCK
	terminal of this unit.

Station your iPod back in a Yamaha iPod universal 18

dock (such as YDS-10, sold separately) connected to the DOCK terminal of this unit.

■ Bluetooth

Status message	Cause	Remedy	See
			page
Searching...	The Bluetooth adapter and the Bluetooth
	component is in the middle of the pairing.
	The Bluetooth adapter and the Bluetooth
	component is in the middle of establishing
	the connection.
Completed	The paring is completed.
Canceled	The paring is canceled.
BT connected	The connection between the Yamaha
	Bluetooth adapter (such as YBA-10, sold
	separately) and the Bluetooth component
	is established.
Disconnected	The Bluetooth component is disconnected
	from the Bluetooth adapter (such as
	YBA-10, sold separately).

No BT adapter The Bluetooth adapter is not connected to the DOCK terminal.

Connect the Yamaha Bluetooth adapter (such as	18
YBA-10, sold separately) to the DOCK terminal.

58 En