Yamaha RX-V363 Creating your original Scene templates, 27 En, Renaming the Scene templates

Creating your original SCENE templates

You can create your original SCENE templates for each SCENE button. You can refer to the preset 13 SCENE templates to create the original SCENE templates.

■Customizing the preset SCENE

templates

Use this feature to customize the preset SCENE templates.

Select the desired SCENE	Create an original SCENE
template	template
	Viewing DVD: SCENE
	DVD: INPUT
	Viewing DVD: SCENE
SCENE template library
(Image)
	1
	Assign the SCENE
	template to the SCENE
	button

1Press and hold the desired 5SCENE button for 3 seconds and then press 4AMP.

The SCENE template customizing display appears on the front panel display.

1 AMP

3 seconds

Note

When the SCENE template you want to customize is not assigned to any of the 5SCENE button, press 7l/ h repeatedly to recall the desired SCENE template (see page 24).

Selecting the SCENE templates

2Press 7k/ nto select the desired parameter of the SCENE template and then 7l / h to select the desired value of the selected parameter.

You can adjust the following parameters for a SCENE template:

•The input source component

•The active sound field programs or STRAIGHT mode

•The night listening mode setting (see page 31)

−SYSTEM: Keeps the current night listening mode.

−CINEMA: Sets the night listening mode to the CINEMA mode.

−MUSIC: Sets the night listening mode to the MUSIC mode.

3Press the 5SCENE button again to confirm the edit.

1

y

•An asterisk mark (*) appears by the name of the original SCENE template.

•To cancel the procedure, press 4AMP and then 8RETURN.

Notes

•After changing the assignment of the SCENE template to the

5SCENE buttons, you may need to set the input source of the SCENE template on the remote control. See page 28 for details.

•You can create a customized SCENE template for each

5SCENE button, and if you create another customized SCENE template, this unit overwrites the old customized SCENE template with the new one.

•The customized SCENE template is only available for the assigned 5SCENE button.

■Renaming the SCENE templates

Select SCENE in step 2 of “Customizing the preset SCENE templates” and then press

7ENTER.

•Press 7k/ nto select the desired character.

•Press 7l/ hto place “_” (underscore) under the space or the desired character.

•Press 8RETURN to cancel the new name.

•Press 7ENTER to confirm the new name.

OPERATION BASIC

English

27 En