Yamaha RX-V363 Advanced setup, 54 En, Speaker impedance SP IMP A. and Canada models only

Page 58

Advanced setup

This unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment.

Notes

•Only A STANDBY/ON, K PROGRAM l/ hand

L STRAIGHT are effective while you are using the advanced setup menu.

•No other operations can be made while you are using the advanced setup menu.

•The advanced setup menu is only available in the front panel display.

1Press A STANDBY/ON on the front panel to set this unit to the standby mode.

2Press and hold J TONE CONTROL and then press A STANDBY/ON to turn on this

unit.

This unit turns on, and the advanced setup menu appears in the front panel display.

3Press K PROGRAM l / h to select the parameter you want to adjust.

The name of the selected parameter appears in the front panel display.

4Press L STRAIGHT repeatedly to change the selected parameter setting.

5Press A STANDBY/ON to confirm your selection and set this unit to the standby mode.

y

The settings you made are reflected next time you turn on this unit.

■Speaker impedance SP IMP.

(U.S.A. and Canada models only)

Use this feature to set the speaker impedance of this unit so that it matches that of your speakers.

Choices: 8ΩMIN, 6ΩMIN

•Select “8ΩMIN” to set the speaker impedance to 8 Ω .

•Select “6ΩMIN” to set the speaker impedance to 6 Ω .

SP IMP.

Speaker

Impedance level

 

 

 

 

Front (A or B)

 

 

 

The impedance of each

 

 

8ΩMIN

Center

speaker must be 8 Ω or

 

 

higher.

 

Surround

 

 

 

 

 

Front (A or B)

 

 

 

The impedance of each

 

 

6ΩMIN

Center

speaker must be 6 Ω or

 

 

higher.

 

Surround

 

 

 

 

■Tuner frequency step TU

(Asia and General models only)

Use this feature to set the tuner frequency step according to the frequency spacing in your area.

Choices: AM10/FM100, AM9/FM50

•Select “AM10/FM100” for North, Central and South America.

•Select “AM9/FM50” for all other areas.

■Initializing PRESET

Use this feature to reset all the parameters of this unit to the initial factory settings.

Choices: CANCEL, RESET

•Select “CANCEL” not to reset any parameters of this unit.

•Select “RESET” to reset the parameters of this unit.

Notes

•This setting completely resets all the parameters of this unit including the set menu parameters. However, the advanced setup menu parameters will not be initialized.

•The initial factory settings are activated next time you turn on this unit.

54 En

Page 57 Page 59
Image 58
Page 57 Page 59
Contents RX-V363 Important Safety Instructions FCC Information for US customers Example of Antenna GroundingPour LES Consommateurs Canadiens For Canadian CustomersSerial No Contents Features We Want You Listening For a LifetimeGetting started Checking the supplied accessoriesInstalling batteries in the remote control Asia and General models onlyPreparation Check the items Set up your speakersQuick start guide Enjoy DVD playbackCenter and surround speakers Front speakersConnect the subwoofer cable to the input Make sure that this unit and the DVD For further connectionsPlayer are unplugged from the AC wall outlets About Scene function Using the other Scene buttonsRotate H Volume to adjust the volume Check the type of the connected speakersWhat do you want to do with this unit? Rear panel ConnectionsName See Placing speakers 10 EnBefore connecting to the Speakers Terminal Connecting speakers11 En Connecting to the Front B, CENTER, and Surround terminals Connecting to the Front a terminals12 En Audio jacks Information on jacks and cable plugs13 En Video jacksHdmi jack and cable plug Information on Hdmi14 En Hdmi cable plug15 En Connecting video componentsDVD player 16 En Connecting to the Hdmi or Component Video jacksConnecting to the Component Video jacks Hdmi connectionConnecting to the Multi CH Input jacks Connecting audio componentsConnecting a CD player and a CD recorder/MD recorder 17 EnConnecting to the Video AUX jacks on the front panel 18 EnTurning on and off the power Connecting the FM and AM antennasConnecting the power cable 19 EnFront panel display 20 En1Infrared window Using the remote control21 En 30ºSPEAKERS..5spk Basic setup22 En CHECKTestTone Press 7l/ h to select the desired settingPress Hmenu to exit from Basic Setup 23 EnD M o v i e V i e w Selecting the Scene templatesSelecting the desired Scene template D V i e w i n g25 En Which Scene template would you like to select?Preset Scene template descriptions 26 En27 En Customizing the preset Scene TemplatesCreating your original Scene templates Renaming the Scene templates28 En Using remote control on the Scene featureControlling the input source Components in the Scene mode Scene buttonsBasic operations Guide to contentsPlayback V i e D r a m a t i cAdditional operations 30 En31 En Selecting the night listening modeAdjusting the tonal quality Selecting audio input jacksPress 4AMP and then press Hmenu on the remote control Adjusting speaker levels during PlaybackDisplaying the signal information 32 EnPlaying video sources Background Using the sleep timer33 En Audio sourcesSound field program descriptions Category Program FeaturesSound field programs 34 En35 En Editing sound fields parameters36 En Enjoying unprocessed input sources Straight decoding modeTo deactivate the Straight mode, press Manual tuning FM/AM tuningAutomatic tuning AM 1440 kHzC3AM 630 kHz Automatic preset tuningManual preset tuning 38 EnPress and hold B PRESET/TUNING for more than 3 seconds Selecting preset stationsExchanging preset stations E1FM 87.5 MHz40 En Using iPodAUX/DOCK Quick pairing Using Bluetooth componentsPairing by using SET Menu 41 EnRecording 42 EnParameter Features Basic setup Basic SetupManual setup Manual Setup Set menu44 En Using set menuSignal information Signal Info 8RETURNSpeaker settings Aspeaker SET 45 En46 En Speaker level BSP Level100Hz 47 En48 En Audio settings Gaudio SETInput assignment 49 En Multi channel input setupDVD My DVD BGV BGV50 En Display settings Adisplay SETBluetooth setting Ebluetooth Parameter initialization DPARAM. INI 51 En Remote control features Controlling this unit, a TV, or other components Controlling this unitControlling other components Remote control Player/recor52 En Digital TVRemote control code default settings Setting remote control codesResetting all remote control codes 53 En54 En Advanced setupInitializing Preset Speaker impedance SP IMP A. and Canada models only55 En TroubleshootingProblem Cause Remedy See General56 En 57 En TunerIPod Bluetooth58 En Status message Cause Remedy SeeAdvanced setup menu appears in the front panel display Remote controlResetting the system 59 En60 En GlossaryAudio information Video information 61 EnSound field program information Cinema DSPSpecifications 62 En63 En IndexNumerics 64 En IPod connectedFront panel C D E F G H10 ENT List of remote control codes IiiCCE NEI TV/VCR TV/DVDTV/DVD/VCR VCRWN25860 RX-V363 Front panel/Face avantRemote control/Boîtier de télécommande
Related manuals
Manual 76 pages 22.92 Kb
Top Page Image Contents