Preparations Before Use
AC adapter connection
When using the recorder with the provided AC adapter, follow the procedure below to connect the AC adapter.
If you wish to use batteries, please refer to the Using batteries section.
Notes:
•Only use the AC adapter that is provided with the recorder.
•Running the recorder on DC power without using the provided AC adapter will cause damage to the recorder.
1.Connect the plug of AC power pack into the DC IN jack on the recorder.
2.Connect the Power cord to a regular household plug socket.
Using batteries
If you wish to run the recorder on battery power, follow the procedure below to install batteries into the recorder. The following types of battery can be used.
•Alkaline batteries (AA type)
•
Notes:
•When alkaline batteries (1450mAh type) are used recording: about 5 hours
•When running the recorder on batteries, always set the battery type in the preset menu to the correct setting for the batteries used. (vP.65)
•If the batteries run out during recording, recording automatically stops and the file information is updated before the recorder shuts down.
•AC adapter is priority than battery. In both power driven, when the AC adapter is taken off, the battery can backup and keep the all behavior on the PMD620MKII.
1.Check that the power is turned off.
2.Slide and pull the battery compartment.
PHONES | T |
|
| LINE |
|
| OU | REM |
|
| |
|
| OTE |
DCIN
POWER
PMD620
15