Skip Back
DISPLAY
VOL |
|
| MENU/STORE |
ENTER | SKIP BACK |
|
VOL
RETAKE
Press the SKIP BACK button during playback or pause to return the amount of time set in the preset Skip Back from the current playback point. (v P.64)
When this button is pressed during the
Passcode Input
The passcode between 0000 and 9999 that is set at “Passcode” must be input to make the “Menu Lock” and “Passcode” settings on the preset menu and to play files recorded with encrypted recording.
When starting to make these settings or to play such files, the passcode input screen appears on the display and the character selected with the cursor flashes. By factory default, “0000” is displayed.
1.Press the VOL + or VOL – button to change the character.
•The number increases between 0 and 9 each time the VOL + button is pressed, and decreases between 0 and 9 each time the VOL – button is pressed.
•Press the 8 or 9 button to move the cursor.
2.Either press the 1/3/ENTER button or press the 9 button with the cursor set at the last character to enter the passcode.
•Inputting can be cancelled by pressing the STOP/CANCEL button.
Note:
If you have forgotten the passcode, you can change it to “0000” by restoring the PMD620MKII to the factory defaults. (vP.79)
33