Save Settings
Save Settings saves all of the preset values onto the SD card. To set the saved files onto the PMD620MKII, perform Load Settings.
1.From Stop, press and hold the DISPLAY button for one second.
2.Press the VOL + or VOL – button to select “Utility”. Then press the 1/3/ENTER button to accept.
3.Press the VOL + or VOL – button to select “Save Settings”.
Card Check
The “Card Check” checks the writing performance of the SD card being used and displays the results, as shown below.
Display | Description | |
Good | Recording is possible without problems. | |
Poor | Writing problems may occur during recording. | |
It is recommended you use a different SD card. | ||
|
Notes:
•Do not turn the power off or open the SD card compartment’s lid while the card is being checked. Doing so could damage the card or data. Also, it is recommended you use the AC adapter when checking the card.
•The check results are for reference purposes only; they do not guarantee operation.
4.Press the 1/3/ENTER button. “Save?” message is displayed.
•Press the STOP/CANCEL button to cancel saving item and return to Stop mode.
5.While “Save?” message is displayed, select “Yes” and press 1/3/ENTER button to output preset value in text format into the file in a route folder on card. The title of the file output is “620preset2.txt”. During preset output, “Executing...” is displayed. After the file output is completed, “Completed” is displayed for one second and returns to Stop mode.
53