CAMERA SETUP
The initial setup process for your trail camera is very easy. Turn on the unit and then press the “SETUP” button. The display icons/indicators (shown below) will blink in turn to indicate which type of setting you are making, beginning with “DATE”. Press “UP” or “DOWN” to go to the next setup item. Press the “OK” button to confirm a specific menu setting when it is blinking. After you have completed making the settings for all menu items (or after going back in to change a setting for just one item), press “SETUP” again to exit setup mode.
1. Date
2. Time
3. 4 Digit Display
4. Still Photo Mode /
Resolution
5. Video Mode
6. Delay Time
7 7. SD Card
Setup Icons- Display Guide
1. Setting the Date, Year and Time
Follow the steps below to set the Date, Year and Time so they will be correct when they are imprinted on your photos:
Set Date and Year
•First, move the Power Switch to the “ON” position, and then press the “SETUP” button.
•The “DATE” indicator (#1) will be blinking. Press “OK” to confirm you want to set it.
•The first two digits of the 4 digit display (#3) indicate the month (MM) and the last two digits indicate the day (DD).
•Press “UP” or “DOWN” to select the month between
9