Philips WV-NM100 operating instructions Connection type Description of the parameter

Page 27

Parameters for the "Network setup" Items Depending on the Connection Type

Item

Connection type

Description of the parameter

IP address

Connection type 1

Enter "xxx.yyy.zzz.nnn" for the IP address (where "xxx.yyy.zzz"

 

 

should be the same numbers assigned to the PC, and "nnn" should

 

 

be a number from 2 to 254 except the same IP address already

 

 

assigned to the PC and any other cameras).

 

 

 

 

Connection type 2

Set the IP address designated by your network administrator.

 

 

However, the setting is not required if the DHCP is used in an

 

 

intranet.

 

 

 

 

Connection type 3*1

Set the IP address designated by your Internet service provider.

 

Connection type 4*2

If the broadband router uses the DHCP: No setting required

 

 

If the broadband router does not use the DHCP: Assignment of a

 

 

private IP address is required. However, the IP addresses already

 

 

assigned to the PC and other cameras are not available.

 

 

For further information, refer to the operating instructions of the

 

 

broadband router.

 

 

 

Netmask

Connection type 1

Use the default setting "255.255.255.0" for the subnet mask.

 

 

 

 

Connection type 2

Set the subnet mask designated by your network administrator.

 

 

However, the setting is not required if the DHCP is used in an

 

 

intranet.

 

 

 

 

Connection type 3

Set the subnet mask designated by your Internet service provider.

 

 

 

 

Connection type 4

If the broadband router uses the DHCP: No setting required

 

 

If the broadband router does not use the DHCP: Setting of the sub-

 

 

net mask is required.

 

 

For further information, refer to the operating instructions of the

 

 

broadband router.

 

 

 

Default gateway

Connection type 1

If the IP address is set for "xxx.yyy.zzz.nnn", enter "xxx.yyy.zzz.1"

 

 

for the default gateway.

 

 

 

 

Connection type 2

Set the IP address of the default gateway designated by your net-

 

 

work administrator.

 

 

However, the setting is not required if the DHCP is used in an

 

 

intranet.

 

 

 

 

Connection type 3

Set the default gateway designated by your Internet service

 

 

provider.

 

 

 

 

Connection type 4

If the broadband router uses the DHCP: No setting required

 

 

If the broadband router does not use the DHCP: Assignment of an

 

 

IP address to the router is required.

 

 

For further information, refer to the operating instructions of the

 

 

broadband router.

*1 If the camera is accessed via the Internet, set the global IP address.

*2 If the camera is accessed via the Internet, assign the global IP address to the broadband router, and set the address translation function to use. (Refer to page 26.)

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Operating Instructions Risk of Electric Shock Do not Open Important Safety Instructions Contents Advanced Settings for Operation mode Preface FeaturesDo not aim the camera at bright light sources PrecautionsMPEG-4 plug-in is exclusive to Internet Explorer PlatformTrademarks and Registered Trademarks Front View Rear ViewInside of the cord cover Installations Connections Connection exampleRequired cable LAN Using with an Intranet LAN Connection typeRequired hardware Using via the Internet Connection typePreparations for the Setup SetupItems included in the software Setup with the Provided Panasonic IP Setup SoftwareDhcp DNS Using Windows 98 SE Network Setup of the PCScreenshot Using Windows Screenshot Using Windows XP Category View Network Connections window appears Network Setup of the Camera Top Menu page of the camera setup appears WAN Connection type Description of the parameter Bootp Installation of the MPEG-4 Plug-in Basic Settings Camera position Power/Link/Access LEDCharacters for Camera name Up to 32 char Hour, minute and secondQuality of image Browsing PicturesMonitoring a Still Picture of a Single Camera Image capture sizeOne time pan Adjustment of the brightness of the picturePanning and tilting Image sizeMonitoring the Motion Picture of a Single Camera Adjustment of the brightness of the motion picture Monitoring Still Pictures of Multiple Cameras Operation mode page of Advanced setup appears How to Operate Characters for the preset name 1 character to Monitoring the Picture of a Camera in a Preset PositionBrowsing Pictures Saving the Currently Monitored Picture on the PC Motion Detector Function Action when Motion is DetectedInform by sending e-mails Detecting Motion in the Monitored Area Alarm type External alarm inputPre-alarm Post-alarmSetting of the Motion Detection Area Alarm page appears To view the previous or next picture automatically Viewing the Picture Stored in the CameraTransferring Pictures to the Server Password ModeInfo button Date & Time Non alarm transmission Check onDirectory File nameTransferring Pictures to the Server when Motion is Detected Alarm Connector and AUX Output Connector Customizing the Contents of the Alarm MailOther Functions Advanced Settings for Operation mode Advanced SettingsRefresh interval Operation mode selectionMPEG-4 mode setup Bandwidth controlAdjusting the Picture Flicker-less mode Hold SharpnessPAN / Tilt calibration Settings for the Host Authentication Host address Access levelSettings for the User Authentication Example admin Access level System Settings NTP port Time adjustmentSynchronization with NTP server Time is adjust Time setup year-month-day hourminsecDefault setting for Password Default setting for Host name WV-NM100 User nameDefault setting for User name Characters for PasswordSnmp Settings Default setting for Contact Default setting for Community name public Equipment nameDefault setting for Equipment name Default setting for LocationFirmware Upgrade Using HelpPossible cause / Possible solution TroubleshootingDifferent subnet If the camera and the PC are connectedSame subnet If the camera and the PC are connected in aIf Internet Explorer is used If Netscape Communicator is usedError Message List Ddns Camera SpecificationsTerm Explanation Glossary of TermsTerm 2003 N0103-0 V8QA6111BN

WV-NM100 specifications

The Philips WV-NM100 is a powerful and advanced workplace solution designed to enhance productivity and improve work environments. This innovative product incorporates cutting-edge technologies, showcasing Philips’ commitment to delivering exceptional performance and efficiency.

One of the standout features of the WV-NM100 is its advanced noise-cancellation technology. This feature helps create an optimal work atmosphere by minimizing ambient noise, enabling users to focus on their tasks without distractions. Whether in an open office or a bustling retail environment, the WV-NM100 ensures that communication remains clear and effective.

In addition to its noise-cancellation capabilities, the WV-NM100 is equipped with high-definition audio components. This ensures a superior sound experience, making it ideal for video conferencing and virtual meetings. The clarity of the audio allows users to engage in seamless conversations, further enhancing collaboration and teamwork.

The ergonomic design of the WV-NM100 is another highlight. It is crafted with user comfort in mind, featuring adjustable settings that cater to the individual needs of users. This design promotes better posture and reduces fatigue during long hours of use, making it a preferred choice for both home and office settings.

Connectivity is a critical feature of the Philips WV-NM100. It offers multiple connectivity options, including Bluetooth and USB interfaces, allowing for easy integration with various devices. This flexibility makes it compatible with a wide range of platforms, enhancing its usability in diverse environments.

Security is paramount in workplace technology, and the WV-NM100 addresses this need through its robust encryption features. This ensures that all communications remain secure and confidential, providing peace of mind for businesses handling sensitive information.

Furthermore, the Philips WV-NM100 is energy-efficient, in line with the company's commitment to sustainability. It consumes minimal power while delivering outstanding performance, contributing to both cost savings and environmental protection.

In conclusion, the Philips WV-NM100 is a versatile and highly functional workplace solution that combines advanced audio technology, ergonomic design, and strong connectivity options. Its innovative features make it a valuable asset for any work environment, promoting productivity and enhancing collaboration among teams. With a focus on user experience, security, and sustainability, the WV-NM100 stands out as a top choice for businesses looking to elevate their workplace solutions.
Top Page Image Contents