Philips WV-NM100 operating instructions Motion Detector Function, Action when Motion is Detected

Page 42

DETECTING MOTION IN THE MONITORED AREA

When motion is detected in the monitored area, "Alarm" appears on the monitor screen. Simultaneously, you can save the picture of the alarmed area and send an alarm mail by e-mail (motion detector function).

You can also automatically transfer the saved image to the server.

To activate these functions, complete the setting of the "Alarm" page or the "FTP client" page in advance.

Notes

•In case a sensor is connected to the alarm connector of the camera, the functions above are available when the sensor detects motion.

•To reset an alarm, click "Alarm" on the monitor screen.

Motion Detector Function

By using the motion detector function, the alarm signal is sent when motion (changes in the brightness level) is detected in the designated area. With this camera, you can save the picture of the designated area or send an alarm mail when motion is detected.

Set the detection area and the other conditions required for the motion detector function on the "VMD area" page.

!Important

•The motion detector function is available only when "JPEG" is selected for the "Operation mode selection" on the "Operating mode" page of "Advanced setup". The motion detector function does not work when "MPEG-4" is selected.

•When the motion detector function is activated, the speed of loading still pictures (JPEG) may become slower.

•In case the motion detector function is set to ON, when the brightness level setting is changed an alarm will be detected.

Action when Motion is Detected

By setting the motion detector function, you can set the camera to activate the following operations when motion (changes in the brightness level) is detected in the designated area.

•When motion is detected, "Alarm" appears on the monitor screen as shown in screenshot below.

"Alarm" will disappear by clicking on it.

Note

The camera checks the alarm status and reloads the browser page by the minute or when the reload button is pressed. Therefore, approximately a minute delay at the maximum may occur until "Alarm" appears on the brows- er after an alarm occurred.

• You can save the picture of the area where motion is detected on the camera.

Number of pictures you can save: 30 pictures max. per 1 alarm (You can set the number of images to be saved up to 20 pictures for pre-alarm and up to 20 pictures for post-alarm, but the total number of images to be saved should

be 30 pictures max.)

 

Maximum number of pictures saved:

Up to 60 pictures without reference to sizes.

The older pictures will automatically be deleted if the number of the pictures exceeds 60 pictures.

! Important

Setting of the number of pictures to be saved per 1 alarm (for pre-alarm and post-alarm) to secure the space for the set number of pictures is required in advance. For example, if the number of pictures to be saved per 1 alarm is set to 20 pictures (10 for pre-alarm and 10 for post-alarm), the maximum number of pictures that can be saved will be 39. (The maximum number of pictures that can be saved is 60 but the space secured in advance for 20 pic- tures and 1 picture which is currently used must be subtracted.)

42

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Operating Instructions Risk of Electric Shock Do not Open Important Safety Instructions Contents Advanced Settings for Operation mode Features PrefacePrecautions Do not aim the camera at bright light sourcesPlatform MPEG-4 plug-in is exclusive to Internet ExplorerTrademarks and Registered Trademarks Front View Rear ViewInside of the cord cover Installations Connections Connection exampleRequired cable Using with an Intranet LAN Connection type LANUsing via the Internet Connection type Required hardwareSetup Preparations for the SetupSetup with the Provided Panasonic IP Setup Software Items included in the softwareDhcp DNS Network Setup of the PC Using Windows 98 SEScreenshot Using Windows Screenshot Using Windows XP Category View Network Connections window appears Network Setup of the Camera Top Menu page of the camera setup appears WAN Connection type Description of the parameter Bootp Installation of the MPEG-4 Plug-in Basic Settings Hour, minute and second Power/Link/Access LEDCharacters for Camera name Up to 32 char Camera positionImage capture size Browsing PicturesMonitoring a Still Picture of a Single Camera Quality of imageImage size Adjustment of the brightness of the picturePanning and tilting One time panMonitoring the Motion Picture of a Single Camera Adjustment of the brightness of the motion picture Monitoring Still Pictures of Multiple Cameras Operation mode page of Advanced setup appears How to Operate Monitoring the Picture of a Camera in a Preset Position Characters for the preset name 1 character toBrowsing Pictures Saving the Currently Monitored Picture on the PC Action when Motion is Detected Motion Detector FunctionInform by sending e-mails Detecting Motion in the Monitored Area Post-alarm External alarm inputPre-alarm Alarm typeSetting of the Motion Detection Area Alarm page appears Viewing the Picture Stored in the Camera To view the previous or next picture automaticallyTransferring Pictures to the Server Password ModeInfo button File name Non alarm transmission Check onDirectory Date & TimeTransferring Pictures to the Server when Motion is Detected Alarm Connector and AUX Output Connector Customizing the Contents of the Alarm MailOther Functions Advanced Settings Advanced Settings for Operation modeBandwidth control Operation mode selectionMPEG-4 mode setup Refresh intervalAdjusting the Picture Flicker-less mode Hold SharpnessPAN / Tilt calibration Settings for the Host Authentication Access level Host addressSettings for the User Authentication Example admin Access level System Settings Time setup year-month-day hourminsec Time adjustmentSynchronization with NTP server Time is adjust NTP portCharacters for Password Default setting for Host name WV-NM100 User nameDefault setting for User name Default setting for PasswordSnmp Settings Default setting for Location Default setting for Community name public Equipment nameDefault setting for Equipment name Default setting for ContactUsing Help Firmware UpgradeTroubleshooting Possible cause / Possible solutionIf the camera and the PC are connected in a If the camera and the PC are connectedSame subnet Different subnetIf Netscape Communicator is used If Internet Explorer is usedError Message List Ddns Specifications CameraGlossary of Terms Term ExplanationTerm 2003 N0103-0 V8QA6111BN

WV-NM100 specifications

The Philips WV-NM100 is a powerful and advanced workplace solution designed to enhance productivity and improve work environments. This innovative product incorporates cutting-edge technologies, showcasing Philips’ commitment to delivering exceptional performance and efficiency.

One of the standout features of the WV-NM100 is its advanced noise-cancellation technology. This feature helps create an optimal work atmosphere by minimizing ambient noise, enabling users to focus on their tasks without distractions. Whether in an open office or a bustling retail environment, the WV-NM100 ensures that communication remains clear and effective.

In addition to its noise-cancellation capabilities, the WV-NM100 is equipped with high-definition audio components. This ensures a superior sound experience, making it ideal for video conferencing and virtual meetings. The clarity of the audio allows users to engage in seamless conversations, further enhancing collaboration and teamwork.

The ergonomic design of the WV-NM100 is another highlight. It is crafted with user comfort in mind, featuring adjustable settings that cater to the individual needs of users. This design promotes better posture and reduces fatigue during long hours of use, making it a preferred choice for both home and office settings.

Connectivity is a critical feature of the Philips WV-NM100. It offers multiple connectivity options, including Bluetooth and USB interfaces, allowing for easy integration with various devices. This flexibility makes it compatible with a wide range of platforms, enhancing its usability in diverse environments.

Security is paramount in workplace technology, and the WV-NM100 addresses this need through its robust encryption features. This ensures that all communications remain secure and confidential, providing peace of mind for businesses handling sensitive information.

Furthermore, the Philips WV-NM100 is energy-efficient, in line with the company's commitment to sustainability. It consumes minimal power while delivering outstanding performance, contributing to both cost savings and environmental protection.

In conclusion, the Philips WV-NM100 is a versatile and highly functional workplace solution that combines advanced audio technology, ergonomic design, and strong connectivity options. Its innovative features make it a valuable asset for any work environment, promoting productivity and enhancing collaboration among teams. With a focus on user experience, security, and sustainability, the WV-NM100 stands out as a top choice for businesses looking to elevate their workplace solutions.
Top Page Image Contents