Philips WV-NM100 operating instructions Inform by sending e-mails

Page 43

• Inform by sending e-mails.

You can send an alarm mail that notifies an alarm has occurred and the alarm date and time to a designated e-mail address registered in advance.

You can also attach a picture to that mail.

You can register up to four e-mail addresses to which this alarm mail will be sent. Contents of the alarm mail:

"In WV-NM100, Alarm was occurred. Date: XXXX.XX.XX.XX:XX:XX

URL: http:// xxx.yyy.zzz.nnn/alarm/image/*****.jpg"

(XXXX.XX.XX.XX:XX:XX is the date: year-month-day hour:min:sec) (xxx.yyy.zzz.nnn is the IP address of the camera)

(***** is the file name)

The alarm mail contains the link address to the saved picture on the camera. This link address is available only when a global IP address is assigned to the camera. If a private address is assigned to the camera, only PCs in the same subnet of the camera can access to this link address. However, the picture accessed from the link address may have been deleted if alarms occur frequently.

You can customize the contents of the alarm mail. For further information, refer to page 53.

Note

When user authentication is activated on the "User authentication" page, authentication is required before users access the picture. (Refer to p.60.)

• Transfer the saved pictures to the server.

You can transfer the pictures saved in the camera to a server designated in advance. Refer to page 49 for the set- tings.

Settings of the Actions to be Performed when Motion is Detected

Set actions to be performed when motion is detected.

The settings can be made in the "Alarm" page.

! Important

Do not perform panning, tilting or preset operations after setting the motion detection area.

The detection area will be inaccurate and it may be impossible to detect motion in the area under surveillance.

Screenshot 1

Begin the operation from the "Basic setup" page.

Refer to page 24 and 25 to display the "Basic setup" page.

STEP1

Click the [Advanced setup] button.

43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Operating Instructions Risk of Electric Shock Do not Open Important Safety Instructions Contents Advanced Settings for Operation mode Preface FeaturesDo not aim the camera at bright light sources PrecautionsMPEG-4 plug-in is exclusive to Internet Explorer PlatformTrademarks and Registered Trademarks Rear View Front ViewInside of the cord cover Installations Connection example ConnectionsRequired cable LAN Using with an Intranet LAN Connection typeRequired hardware Using via the Internet Connection typePreparations for the Setup SetupItems included in the software Setup with the Provided Panasonic IP Setup SoftwareDhcp DNS Using Windows 98 SE Network Setup of the PCScreenshot Using Windows Screenshot Using Windows XP Category View Network Connections window appears Network Setup of the Camera Top Menu page of the camera setup appears WAN Connection type Description of the parameter Bootp Installation of the MPEG-4 Plug-in Basic Settings Camera position Power/Link/Access LEDCharacters for Camera name Up to 32 char Hour, minute and secondQuality of image Browsing PicturesMonitoring a Still Picture of a Single Camera Image capture sizeOne time pan Adjustment of the brightness of the picturePanning and tilting Image sizeMonitoring the Motion Picture of a Single Camera Adjustment of the brightness of the motion picture Monitoring Still Pictures of Multiple Cameras Operation mode page of Advanced setup appears How to Operate Characters for the preset name 1 character to Monitoring the Picture of a Camera in a Preset PositionBrowsing Pictures Saving the Currently Monitored Picture on the PC Motion Detector Function Action when Motion is DetectedInform by sending e-mails Detecting Motion in the Monitored Area Alarm type External alarm inputPre-alarm Post-alarmSetting of the Motion Detection Area Alarm page appears To view the previous or next picture automatically Viewing the Picture Stored in the CameraTransferring Pictures to the Server Mode PasswordInfo button Date & Time Non alarm transmission Check onDirectory File nameTransferring Pictures to the Server when Motion is Detected Customizing the Contents of the Alarm Mail Alarm Connector and AUX Output ConnectorOther Functions Advanced Settings for Operation mode Advanced SettingsRefresh interval Operation mode selectionMPEG-4 mode setup Bandwidth controlAdjusting the Picture Hold Sharpness Flicker-less modePAN / Tilt calibration Settings for the Host Authentication Host address Access levelSettings for the User Authentication Example admin Access level System Settings NTP port Time adjustmentSynchronization with NTP server Time is adjust Time setup year-month-day hourminsecDefault setting for Password Default setting for Host name WV-NM100 User nameDefault setting for User name Characters for PasswordSnmp Settings Default setting for Contact Default setting for Community name public Equipment nameDefault setting for Equipment name Default setting for LocationFirmware Upgrade Using HelpPossible cause / Possible solution TroubleshootingDifferent subnet If the camera and the PC are connectedSame subnet If the camera and the PC are connected in aIf Internet Explorer is used If Netscape Communicator is usedError Message List Ddns Camera SpecificationsTerm Explanation Glossary of TermsTerm 2003 N0103-0 V8QA6111BN

WV-NM100 specifications

The Philips WV-NM100 is a powerful and advanced workplace solution designed to enhance productivity and improve work environments. This innovative product incorporates cutting-edge technologies, showcasing Philips’ commitment to delivering exceptional performance and efficiency.

One of the standout features of the WV-NM100 is its advanced noise-cancellation technology. This feature helps create an optimal work atmosphere by minimizing ambient noise, enabling users to focus on their tasks without distractions. Whether in an open office or a bustling retail environment, the WV-NM100 ensures that communication remains clear and effective.

In addition to its noise-cancellation capabilities, the WV-NM100 is equipped with high-definition audio components. This ensures a superior sound experience, making it ideal for video conferencing and virtual meetings. The clarity of the audio allows users to engage in seamless conversations, further enhancing collaboration and teamwork.

The ergonomic design of the WV-NM100 is another highlight. It is crafted with user comfort in mind, featuring adjustable settings that cater to the individual needs of users. This design promotes better posture and reduces fatigue during long hours of use, making it a preferred choice for both home and office settings.

Connectivity is a critical feature of the Philips WV-NM100. It offers multiple connectivity options, including Bluetooth and USB interfaces, allowing for easy integration with various devices. This flexibility makes it compatible with a wide range of platforms, enhancing its usability in diverse environments.

Security is paramount in workplace technology, and the WV-NM100 addresses this need through its robust encryption features. This ensures that all communications remain secure and confidential, providing peace of mind for businesses handling sensitive information.

Furthermore, the Philips WV-NM100 is energy-efficient, in line with the company's commitment to sustainability. It consumes minimal power while delivering outstanding performance, contributing to both cost savings and environmental protection.

In conclusion, the Philips WV-NM100 is a versatile and highly functional workplace solution that combines advanced audio technology, ergonomic design, and strong connectivity options. Its innovative features make it a valuable asset for any work environment, promoting productivity and enhancing collaboration among teams. With a focus on user experience, security, and sustainability, the WV-NM100 stands out as a top choice for businesses looking to elevate their workplace solutions.
Top Page Image Contents