Philips Customizing Alarm Mail for Your Security Camera Notifications
Page 53

OTHER FUNCTIONS

Alarm Connector and AUX Output Connector

Security door sensor

inputAlarm

Alarm input connector

Ground terminal

Alarm output connector

AUX output connector

(To control external devices:

for example, lighting ON and OFF)

You can set the alarm operation when an exter- nal device such as a sensor is connected to the alarm connector inside the cord cover of the camera.

You can set functions such as sending e-mails or transferring pictures to the server when an alarm signal is input by a sensor, as explained in "Settings of the Actions to be Performed when Motion is Detected" on page 43.

! Important

Do not connect an external device if it is beyond the specified ratings of the camera (refer to page 68).

You can set the type of the device connected to the AUX output connector.

The settings can be made on the "AUX output" page of "Alarm&Transmission".

Click the [Alarm&Transmission] button, and then click the [AUX output] tab.

The "AUX output" page of "Alarm&Trans- mission" appears and you can check the current setting of the "AUX setup".

Click the [SET] button after selecting "High" or "Low", according to the specifications of the external device to be connected, to enable the setting.

Customizing the Contents of the Alarm Mail

You can customize the contents of the alarm mail notifying that an alarm has occurred and the alarm date and time. To customize them, do the following:

STEP1

STEP2

Create the contents of the alarm mail with a text editor and save the file as "almmail.tmpl".

Start up the FTP software and connect to the camera by entering the IP address of the camera.

The destination where to transfer the file is "/flash". To login to the camera, enter "admin" for the user name and the password registered for the user name "admin" if the password has been changed (the default password is "password").

STEP3

Upload the new file (almmail.tmpl) in text format to the camera.

53

Page 52 Page 54
Image 53
Page 52 Page 54
Contents Operating Instructions Risk of Electric Shock Do not Open Important Safety Instructions Contents Advanced Settings for Operation mode Preface FeaturesDo not aim the camera at bright light sources PrecautionsMPEG-4 plug-in is exclusive to Internet Explorer PlatformTrademarks and Registered Trademarks Inside of the cord cover Front ViewRear View Installations Required cable ConnectionsConnection example LAN Using with an Intranet LAN Connection typeRequired hardware Using via the Internet Connection typePreparations for the Setup SetupItems included in the software Setup with the Provided Panasonic IP Setup SoftwareDhcp DNS Using Windows 98 SE Network Setup of the PCScreenshot Using Windows Screenshot Using Windows XP Category View Network Connections window appears Network Setup of the Camera Top Menu page of the camera setup appears WAN Connection type Description of the parameter Bootp Installation of the MPEG-4 Plug-in Basic Settings Characters for Camera name Up to 32 char Power/Link/Access LEDHour, minute and second Camera positionMonitoring a Still Picture of a Single Camera Browsing PicturesImage capture size Quality of imagePanning and tilting Adjustment of the brightness of the pictureImage size One time panMonitoring the Motion Picture of a Single Camera Adjustment of the brightness of the motion picture Monitoring Still Pictures of Multiple Cameras Operation mode page of Advanced setup appears How to Operate Characters for the preset name 1 character to Monitoring the Picture of a Camera in a Preset PositionBrowsing Pictures Saving the Currently Monitored Picture on the PC Motion Detector Function Action when Motion is DetectedInform by sending e-mails Detecting Motion in the Monitored Area Pre-alarm External alarm inputPost-alarm Alarm typeSetting of the Motion Detection Area Alarm page appears To view the previous or next picture automatically Viewing the Picture Stored in the CameraTransferring Pictures to the Server Info button PasswordMode Directory Non alarm transmission Check onFile name Date & TimeTransferring Pictures to the Server when Motion is Detected Other Functions Alarm Connector and AUX Output ConnectorCustomizing the Contents of the Alarm Mail Advanced Settings for Operation mode Advanced SettingsMPEG-4 mode setup Operation mode selectionBandwidth control Refresh intervalAdjusting the Picture PAN / Tilt calibration Flicker-less modeHold Sharpness Settings for the Host Authentication Host address Access levelSettings for the User Authentication Example admin Access level System Settings Synchronization with NTP server Time is adjust Time adjustmentTime setup year-month-day hourminsec NTP portDefault setting for User name Default setting for Host name WV-NM100 User nameCharacters for Password Default setting for PasswordSnmp Settings Default setting for Equipment name Default setting for Community name public Equipment nameDefault setting for Location Default setting for ContactFirmware Upgrade Using HelpPossible cause / Possible solution TroubleshootingSame subnet If the camera and the PC are connectedIf the camera and the PC are connected in a Different subnetIf Internet Explorer is used If Netscape Communicator is usedError Message List Ddns Camera SpecificationsTerm Explanation Glossary of TermsTerm 2003 N0103-0 V8QA6111BN

WV-NM100 specifications

The Philips WV-NM100 is a powerful and advanced workplace solution designed to enhance productivity and improve work environments. This innovative product incorporates cutting-edge technologies, showcasing Philips’ commitment to delivering exceptional performance and efficiency.

One of the standout features of the WV-NM100 is its advanced noise-cancellation technology. This feature helps create an optimal work atmosphere by minimizing ambient noise, enabling users to focus on their tasks without distractions. Whether in an open office or a bustling retail environment, the WV-NM100 ensures that communication remains clear and effective.

In addition to its noise-cancellation capabilities, the WV-NM100 is equipped with high-definition audio components. This ensures a superior sound experience, making it ideal for video conferencing and virtual meetings. The clarity of the audio allows users to engage in seamless conversations, further enhancing collaboration and teamwork.

The ergonomic design of the WV-NM100 is another highlight. It is crafted with user comfort in mind, featuring adjustable settings that cater to the individual needs of users. This design promotes better posture and reduces fatigue during long hours of use, making it a preferred choice for both home and office settings.

Connectivity is a critical feature of the Philips WV-NM100. It offers multiple connectivity options, including Bluetooth and USB interfaces, allowing for easy integration with various devices. This flexibility makes it compatible with a wide range of platforms, enhancing its usability in diverse environments.

Security is paramount in workplace technology, and the WV-NM100 addresses this need through its robust encryption features. This ensures that all communications remain secure and confidential, providing peace of mind for businesses handling sensitive information.

Furthermore, the Philips WV-NM100 is energy-efficient, in line with the company's commitment to sustainability. It consumes minimal power while delivering outstanding performance, contributing to both cost savings and environmental protection.

In conclusion, the Philips WV-NM100 is a versatile and highly functional workplace solution that combines advanced audio technology, ergonomic design, and strong connectivity options. Its innovative features make it a valuable asset for any work environment, promoting productivity and enhancing collaboration among teams. With a focus on user experience, security, and sustainability, the WV-NM100 stands out as a top choice for businesses looking to elevate their workplace solutions.
Top Page Image Contents