Philips WV-NM100 Panning and tilting, Adjustment of the brightness of the picture, Image size

Page 33

How to operate

If the preparations have been completed, you can begin the operation from the "Basic setup" page.

Screenshot 1

Begin the operation from the "Basic setup" page.

Screenshot 2

The "Control" page appears and the still picture of the cam- era is displayed. Operation buttons are displayed below the still picture.

Note

•If the preparations have been completed, start up the browser and display the "Top Menu" page of the desired camera. The camera picture appears on the "Top Menu" page.

•Several pictures shot during the panning/tilting may not be displayed when "Refresh interval" is set to "Very Slow".

STEP1

Click the "Control" button.

STEP2

Operate the camera and adjust the picture.

Panning and tilting

Click the arrow buttons (up / down / right / left) to adjust the horizontal and vertical position.

The center of the box surrounded by the arrow buttons (the point where the horizontal line and the vertical line cross) is the current position of the camera.

If you click inside the box surrounded by the arrow buttons, you can pan and tilt the camera wider than by clicking the arrow buttons.

Image capture size

Click one of the picture resolution buttons (VGA (640 x 480) / QVGA (320 x 240) / QQVGA (160 x 120)) to display the picture with the desired resolution.

Adjustment of the brightness of the picture

Click the buttons to adjust the brightness of the picture. The left end button (–) is the darkest and the right end button (+) is the brightest. The green button is the currently selected level.

Image size

Click one of the buttons (x1.0 / x1.5 / x2.0) to select the desired image size.

When the picture is magnified, the quality of the picture may be decreased.

AUX

Click one of the buttons (High/Low) to set the status of the AUX output connector. (Refer to p. 53 for details.)

One time pan

You can monitor the picture by panning the camera one time to the left and right.

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Operating Instructions Risk of Electric Shock Do not Open Important Safety Instructions Contents Advanced Settings for Operation mode Preface FeaturesDo not aim the camera at bright light sources PrecautionsMPEG-4 plug-in is exclusive to Internet Explorer PlatformTrademarks and Registered Trademarks Front View Rear ViewInside of the cord cover Installations Connections Connection exampleRequired cable LAN Using with an Intranet LAN Connection typeRequired hardware Using via the Internet Connection typePreparations for the Setup SetupItems included in the software Setup with the Provided Panasonic IP Setup SoftwareDhcp DNS Using Windows 98 SE Network Setup of the PCScreenshot Using Windows Screenshot Using Windows XP Category View Network Connections window appears Network Setup of the Camera Top Menu page of the camera setup appears WAN Connection type Description of the parameter Bootp Installation of the MPEG-4 Plug-in Basic Settings Characters for Camera name Up to 32 char Power/Link/Access LEDHour, minute and second Camera positionMonitoring a Still Picture of a Single Camera Browsing PicturesImage capture size Quality of imagePanning and tilting Adjustment of the brightness of the pictureImage size One time panMonitoring the Motion Picture of a Single Camera Adjustment of the brightness of the motion picture Monitoring Still Pictures of Multiple Cameras Operation mode page of Advanced setup appears How to Operate Characters for the preset name 1 character to Monitoring the Picture of a Camera in a Preset PositionBrowsing Pictures Saving the Currently Monitored Picture on the PC Motion Detector Function Action when Motion is DetectedInform by sending e-mails Detecting Motion in the Monitored Area Pre-alarm External alarm inputPost-alarm Alarm typeSetting of the Motion Detection Area Alarm page appears To view the previous or next picture automatically Viewing the Picture Stored in the CameraTransferring Pictures to the Server Password ModeInfo button Directory Non alarm transmission Check onFile name Date & TimeTransferring Pictures to the Server when Motion is Detected Alarm Connector and AUX Output Connector Customizing the Contents of the Alarm MailOther Functions Advanced Settings for Operation mode Advanced SettingsMPEG-4 mode setup Operation mode selectionBandwidth control Refresh intervalAdjusting the Picture Flicker-less mode Hold SharpnessPAN / Tilt calibration Settings for the Host Authentication Host address Access levelSettings for the User Authentication Example admin Access level System Settings Synchronization with NTP server Time is adjust Time adjustmentTime setup year-month-day hourminsec NTP portDefault setting for User name Default setting for Host name WV-NM100 User nameCharacters for Password Default setting for PasswordSnmp Settings Default setting for Equipment name Default setting for Community name public Equipment nameDefault setting for Location Default setting for ContactFirmware Upgrade Using HelpPossible cause / Possible solution TroubleshootingSame subnet If the camera and the PC are connectedIf the camera and the PC are connected in a Different subnetIf Internet Explorer is used If Netscape Communicator is usedError Message List Ddns Camera SpecificationsTerm Explanation Glossary of TermsTerm 2003 N0103-0 V8QA6111BN

WV-NM100 specifications

The Philips WV-NM100 is a powerful and advanced workplace solution designed to enhance productivity and improve work environments. This innovative product incorporates cutting-edge technologies, showcasing Philips’ commitment to delivering exceptional performance and efficiency.

One of the standout features of the WV-NM100 is its advanced noise-cancellation technology. This feature helps create an optimal work atmosphere by minimizing ambient noise, enabling users to focus on their tasks without distractions. Whether in an open office or a bustling retail environment, the WV-NM100 ensures that communication remains clear and effective.

In addition to its noise-cancellation capabilities, the WV-NM100 is equipped with high-definition audio components. This ensures a superior sound experience, making it ideal for video conferencing and virtual meetings. The clarity of the audio allows users to engage in seamless conversations, further enhancing collaboration and teamwork.

The ergonomic design of the WV-NM100 is another highlight. It is crafted with user comfort in mind, featuring adjustable settings that cater to the individual needs of users. This design promotes better posture and reduces fatigue during long hours of use, making it a preferred choice for both home and office settings.

Connectivity is a critical feature of the Philips WV-NM100. It offers multiple connectivity options, including Bluetooth and USB interfaces, allowing for easy integration with various devices. This flexibility makes it compatible with a wide range of platforms, enhancing its usability in diverse environments.

Security is paramount in workplace technology, and the WV-NM100 addresses this need through its robust encryption features. This ensures that all communications remain secure and confidential, providing peace of mind for businesses handling sensitive information.

Furthermore, the Philips WV-NM100 is energy-efficient, in line with the company's commitment to sustainability. It consumes minimal power while delivering outstanding performance, contributing to both cost savings and environmental protection.

In conclusion, the Philips WV-NM100 is a versatile and highly functional workplace solution that combines advanced audio technology, ergonomic design, and strong connectivity options. Its innovative features make it a valuable asset for any work environment, promoting productivity and enhancing collaboration among teams. With a focus on user experience, security, and sustainability, the WV-NM100 stands out as a top choice for businesses looking to elevate their workplace solutions.
Top Page Image Contents