Philips WV-NM100 operating instructions Wan

SETUP

Screenshot 6

The "Network" page appears.

STEP6

Set parameters for each item in the "Network" page.

The parameters differ depending on the connec- tion type (refer to pages 12-14).

For further information, refer to the next page.

STEP7

Click the [SET] button after completing the setup.

! Important

After you click the [SET] button, the "Command Executing" message appears. (This message will appear even when you click the [SET] button in other windows.) Avoid doing any operation while the message is dis- played.

Note

•About the address translation function (Static IP masquerade, Network Address Translation (NAT))

The address translation function changes a global IP address to a private IP address, and "Static IP masquer- ade" and "Network Address Translation (NAT)" have this function. This function is to be set in a router.

To browse camera pictures via the Internet by connecting the camera to a broadband router, it is necessary to assign a respective port number for each camera and address translation by using the address translation func- tion. For further information, refer to the operating instructions of the broadband router.

	Broadband router
Global address	Private address
for the WAN	for the LAN
vvv.xxx.yyy.zzz	192.168.0.254
Enter [Global IP address + : (colon) + port number]
in the "Address" box of the browser via the Internet.
vvv.xxx.yyy.zzz:82
vvv.xxx.yyy.zzz:81	Address translation
	vvv.xxx.yyy.zzz:82 →	192.168.0.2:82
Internet		Private address
		192.168.0.2
(WAN)
		Port number: 82
	Address translation
Cable modem or
xDSL modem	vvv.xxx.yyy.zzz:81 →	192.168.0.1:81
		Private address
		192.168.0.1
		Port number: 81

26