ADVANCED SETTINGS
Setting items
"Community name"
Enter the name of the community to be monitored. This name must be coincident with the community name of SNMP.
Characters for "Community name"
Up to 32 characters (ABCDEFGHIJKLMNOPQRST UVWXYZabcdefghijklmnopqrstuvwxyz0123456789!
Default setting for "Community name": public
"Equipment name"
Enter the same name as "Camera name" on the "Basic Setup" page. (Refer to page 31.)
Characters for "Equipment name"
Up to 32 characters (ABCDEFGHIJKLMNOPQRST UVWXYZabcdefghijklmnopqrstuvwxyz0123456789!
Default setting for "Equipment name"
Note
To ensure security, change the default community name "public" on the "SNMP" page regardless of the SNMP is used or not.
When changing the community name on the "SNMP" page, change also the community name of the SNMP manager to match the newly entered name.
"Location"
Enter the name of the location where the camera is installed.
Characters for "Location"
Up to 32 characters (ABCDEFGHIJKLMNOPQRST UVWXYZabcdefghijklmnopqrstuvwxyz0123456789!
Default setting for "Location"
Nothing is entered for this parameter.
"Contact"
Enter the mail address or telephone number of the administrator of the server.
Characters for "Contact"
Up to 255 characters (ABCDEFGHIJKLMNOPQRST UVWXYZabcdefghijklmnopqrstuvwxyz0123456789!
Default setting for "Contact"
Nothing is entered for this parameter.
66