Philips WV-NM100 Operation mode selection, Bandwidth control, Refresh interval, MPEG-4 mode setup

Page 55

(When "MPEG-4" is selected)

Setting items

"Operation mode selection"

Select "JPEG" (still picture) or "MPEG-4" (motion pic- ture). The parameters for JPEG/MPEG-4 setting auto- matically appear.

"Bandwidth control"

Select a bandwidth control from the following:

32 / 64 / 128 / 256 / 512 / 1024 / Unlimited (kbps) "JPEG mode setup"

If "JPEG" is selected, the setting of the following items is required.

"Refresh interval"

Select a refresh interval from the following: Fast / Middle / Slow / Very Slow

"Image capture size"

Select an image capture size from the following: VGA (640 x 480) / QVGA (320 x 240) / QQVGA (160 x 120)

"Quality of image"

Select a quality of the image from the following. Super Fine / Fine / Normal / Low

! Important

"MPEG-4 mode setup"

If "MPEG-4" is selected, the setting of the following items is required.

"Image capture size"

Select an image capture size from the following: CIF (352 x 288) / QCIF (176 x 144)

"Quality of image"

Select a quality of the image from the following. Fine / Normal / Low

"Max bitrate (per 1 client)"

Select an M-PEG bit rate for each client. 32/64/128/256/512/1024/Unlimited (kbps) "Refresh cycle"

In a network environment with frequent errors, by setting the refresh cycle shorter, you can decrease the cause of interference on the monitor screen. However, the loading speed may become slower. Enter a number between 1 and 30 (sec).

"UDP port"

Enter the transmission port number of the camera. "Transmission type"

Select "Unicast" or "Multicast" for the transmission setting.

"Unicast": Up to four users can connect to a sin- gle camera to monitor the picture.

"Multicast": Maximum number of users connected in a subnet can connect to a single camera to monitor the picture.

"Multicast address"

Set the multicast IP address for transmission. "Multicast port"

Set the multicast port number (number of the port that the camera uses to transmit the picture) for transmission.

•If the setting item is overlapped between "Basic setup" and "Advanced setup", the latest setting has priority.

For example, if a different setting is made on the "Operation mode" page after the same item has been set on the "Basic setup" page, the setting made on the "Operation mode" page is valid.

•You may have problems browsing still/motion pictures depending on the bandwidth of the network to which the camera is connected. In this case, perform the setting of "Bandwidth control" on the "Operation mode" page of "Advanced setup".

•Depending on the traffic of the network, there might be difficulties displaying the picture. In this case, select Slow or Very Slow for "Refresh interval" of "JPEG mode setup".

55

Page 54 Page 56
Image 55
Page 54 Page 56
Contents Operating Instructions Risk of Electric Shock Do not Open Important Safety Instructions Contents Advanced Settings for Operation mode Preface FeaturesDo not aim the camera at bright light sources PrecautionsMPEG-4 plug-in is exclusive to Internet Explorer PlatformTrademarks and Registered Trademarks Rear View Front ViewInside of the cord cover Installations Connection example ConnectionsRequired cable LAN Using with an Intranet LAN Connection typeRequired hardware Using via the Internet Connection typePreparations for the Setup SetupItems included in the software Setup with the Provided Panasonic IP Setup SoftwareDhcp DNS Using Windows 98 SE Network Setup of the PCScreenshot Using Windows Screenshot Using Windows XP Category View Network Connections window appears Network Setup of the Camera Top Menu page of the camera setup appears WAN Connection type Description of the parameter Bootp Installation of the MPEG-4 Plug-in Basic Settings Camera position Power/Link/Access LEDCharacters for Camera name Up to 32 char Hour, minute and secondQuality of image Browsing PicturesMonitoring a Still Picture of a Single Camera Image capture sizeOne time pan Adjustment of the brightness of the picturePanning and tilting Image sizeMonitoring the Motion Picture of a Single Camera Adjustment of the brightness of the motion picture Monitoring Still Pictures of Multiple Cameras Operation mode page of Advanced setup appears How to Operate Characters for the preset name 1 character to Monitoring the Picture of a Camera in a Preset PositionBrowsing Pictures Saving the Currently Monitored Picture on the PC Motion Detector Function Action when Motion is DetectedInform by sending e-mails Detecting Motion in the Monitored Area Alarm type External alarm inputPre-alarm Post-alarmSetting of the Motion Detection Area Alarm page appears To view the previous or next picture automatically Viewing the Picture Stored in the CameraTransferring Pictures to the Server Mode PasswordInfo button Date & Time Non alarm transmission Check onDirectory File nameTransferring Pictures to the Server when Motion is Detected Customizing the Contents of the Alarm Mail Alarm Connector and AUX Output ConnectorOther Functions Advanced Settings for Operation mode Advanced SettingsRefresh interval Operation mode selectionMPEG-4 mode setup Bandwidth controlAdjusting the Picture Hold Sharpness Flicker-less modePAN / Tilt calibration Settings for the Host Authentication Host address Access levelSettings for the User Authentication Example admin Access level System Settings NTP port Time adjustmentSynchronization with NTP server Time is adjust Time setup year-month-day hourminsecDefault setting for Password Default setting for Host name WV-NM100 User nameDefault setting for User name Characters for PasswordSnmp Settings Default setting for Contact Default setting for Community name public Equipment nameDefault setting for Equipment name Default setting for LocationFirmware Upgrade Using HelpPossible cause / Possible solution TroubleshootingDifferent subnet If the camera and the PC are connectedSame subnet If the camera and the PC are connected in aIf Internet Explorer is used If Netscape Communicator is usedError Message List Ddns Camera SpecificationsTerm Explanation Glossary of TermsTerm 2003 N0103-0 V8QA6111BN

WV-NM100 specifications

The Philips WV-NM100 is a powerful and advanced workplace solution designed to enhance productivity and improve work environments. This innovative product incorporates cutting-edge technologies, showcasing Philips’ commitment to delivering exceptional performance and efficiency.

One of the standout features of the WV-NM100 is its advanced noise-cancellation technology. This feature helps create an optimal work atmosphere by minimizing ambient noise, enabling users to focus on their tasks without distractions. Whether in an open office or a bustling retail environment, the WV-NM100 ensures that communication remains clear and effective.

In addition to its noise-cancellation capabilities, the WV-NM100 is equipped with high-definition audio components. This ensures a superior sound experience, making it ideal for video conferencing and virtual meetings. The clarity of the audio allows users to engage in seamless conversations, further enhancing collaboration and teamwork.

The ergonomic design of the WV-NM100 is another highlight. It is crafted with user comfort in mind, featuring adjustable settings that cater to the individual needs of users. This design promotes better posture and reduces fatigue during long hours of use, making it a preferred choice for both home and office settings.

Connectivity is a critical feature of the Philips WV-NM100. It offers multiple connectivity options, including Bluetooth and USB interfaces, allowing for easy integration with various devices. This flexibility makes it compatible with a wide range of platforms, enhancing its usability in diverse environments.

Security is paramount in workplace technology, and the WV-NM100 addresses this need through its robust encryption features. This ensures that all communications remain secure and confidential, providing peace of mind for businesses handling sensitive information.

Furthermore, the Philips WV-NM100 is energy-efficient, in line with the company's commitment to sustainability. It consumes minimal power while delivering outstanding performance, contributing to both cost savings and environmental protection.

In conclusion, the Philips WV-NM100 is a versatile and highly functional workplace solution that combines advanced audio technology, ergonomic design, and strong connectivity options. Its innovative features make it a valuable asset for any work environment, promoting productivity and enhancing collaboration among teams. With a focus on user experience, security, and sustainability, the WV-NM100 stands out as a top choice for businesses looking to elevate their workplace solutions.
Top Page Image Contents