Set Expert Mode

Use Expert mode to speak a command after you hear a tone instead of following the initial voice prompts.

From Expert mode, select one of the following:

Normal sets the phone to default voice prompts.

Expert sets the phone to sound tones instead of voice prompts.

Set Display Results

You can set the phone to display up to three voice recognition contacts when calling or searching for a contact with voice commands.

From Display results, select Single best or Three best.

Set Digit Lengths

You can set the number of digits used for a phone number in your voice dial list.

From Digit lengths, select one of the following options:

North american recognizes only 7, 10, and 1 + 10 digits in a phone number.

Permit all allows 4-14 digits in a phone number.

Voice answer

Enable Voice Answer

You can set your phone to answer a call with your voice when using a hands-free accessory.

1.From Auto answer, select Disabled.

2.From Headset sound, select Out of headset.

3.From Voice answer, select With accessory.

Answer Using Voice Answer

When you receive an incoming call, the phone prompts “Incoming call, answer?”. With the caller recognized as a contact entry in your phone, the phone prompts “Incoming call from (Name), answer?” Do one of the following:

Say “Yes” or press any except the End key to answer the call.

Say “No” or press the End key to ignore the call.

Remain silent. The voice alert repeats twice and the phone rings once before returning to the main screen.

Use Voice Training

If your phone has trouble recognizing your voice, you can train your phone to recognize specifically your voice for numbers.

1.From Voice training, read the message and select OK > Train numbers > OK.

2.Follow the prompts for each number until training is complete.

Note: You must read the numbers digit by digit for voice training to work.

User Guide

65

Page 73
Image 73
Lennox Hearth X-TC manual Set Expert Mode, Set Display Results, Set Digit Lengths, Voice answer, Use Voice Training