Lennox Hearth X-TC End Phone Calls, Activate Voice Dialing, Volume Control, Use Speed Dialing

Answer Using Slide

You can set the phone to instantly answer an incoming call when you slide the phone open. For more information, see “Enable Open to Answer” on page 66.

End Phone Calls

Press the End key.

Activate Voice Dialing

1.Press and hold the Send key.

2.Follow the prompts.

For more information, see “Voice Commands” on page 70.

Volume Control

Adjust Volume during a Call

Press the Volume key up or down to adjust the earpiece volume during a call.

Use the Speakerphone

Your phone has a built-in speakerphone.

•To turn on the speakerphone, press the Speakerphone key. The speakerphone icon appears on the main screen when the speakerphone is on.

•To turn off the speakerphone, press the Speakerphone key again.

Note: If you press the Speakerphone key during an incoming call, you will answer the call.

Silence an Incoming Call

•To silence the phone without answering the call, press the Back key or press the Volume key up or down.

•To silence the phone and answer the call, press the Back key or press the Volume key up or down and then press the Send key.

Use Speed Dialing

Speed dialing allows you to assign a one- or two-digit shortcut to a contact. Before you can use speed dialing you must save a phone number as a contact and assign a speed dial location to it. See “Assign Speed Dials to Contacts” on page 29.

To call a contact that has a speed dial location.

1.Enter the one- or two-digit speed dial location.

2.Press the Send key.

Emergency Services

Call Emergency Service

You can call an emergency code even if your phone is locked or your account is restricted. When you call, your phone enters emergency mode. This enables the emergency service exclusive access to your phone to call you back, if necessary. To make or receive regular calls after dialing the code, you must exit this mode.

User Guide 11