Philips WV-NM100 operating instructions Snmp Settings

Page 65

SNMP Settings

Begin the setting for SNMP (Simple Network Management Protocol): community name, equipment name, location, and e-mail address/telephone number.

These parameters are required to when you connect to the administrative software (SNMP manager). The setting is made on the "SNMP" page.

Screenshot 1

Begin the operation from the "System" page.

Refer to page 62 and 63 to display the "System" page.

STEP1

Click on the [SNMP] tab on the "System" page.

Screenshot 2

The "SNMP" page appears.

STEP2

Set the items on the "SNMP" page.

For details about the items, refer to the next page.

STEP3

Click the [SET] button after completing the set- ting.

65

Image 65

Contents Operating Instructions Risk of Electric Shock Do not Open Important Safety Instructions Contents Advanced Settings for Operation mode Preface FeaturesDo not aim the camera at bright light sources PrecautionsMPEG-4 plug-in is exclusive to Internet Explorer PlatformTrademarks and Registered Trademarks Inside of the cord cover Front ViewRear View Installations Required cable ConnectionsConnection example LAN Using with an Intranet LAN Connection typeRequired hardware Using via the Internet Connection typePreparations for the Setup SetupItems included in the software Setup with the Provided Panasonic IP Setup SoftwareDhcp DNS Using Windows 98 SE Network Setup of the PCScreenshot Using Windows Screenshot Using Windows XP Category View Network Connections window appears Network Setup of the Camera Top Menu page of the camera setup appears WAN Connection type Description of the parameter Bootp Installation of the MPEG-4 Plug-in Basic Settings Characters for Camera name Up to 32 char Power/Link/Access LEDHour, minute and second Camera positionMonitoring a Still Picture of a Single Camera Browsing PicturesImage capture size Quality of imagePanning and tilting Adjustment of the brightness of the pictureImage size One time panMonitoring the Motion Picture of a Single Camera Adjustment of the brightness of the motion picture Monitoring Still Pictures of Multiple Cameras Operation mode page of Advanced setup appears How to Operate Characters for the preset name 1 character to Monitoring the Picture of a Camera in a Preset PositionBrowsing Pictures Saving the Currently Monitored Picture on the PC Motion Detector Function Action when Motion is DetectedInform by sending e-mails Detecting Motion in the Monitored Area Pre-alarm External alarm inputPost-alarm Alarm typeSetting of the Motion Detection Area Alarm page appears To view the previous or next picture automatically Viewing the Picture Stored in the CameraTransferring Pictures to the Server Info button PasswordMode Directory Non alarm transmission Check onFile name Date & TimeTransferring Pictures to the Server when Motion is Detected Other Functions Alarm Connector and AUX Output ConnectorCustomizing the Contents of the Alarm Mail Advanced Settings for Operation mode Advanced SettingsMPEG-4 mode setup Operation mode selectionBandwidth control Refresh intervalAdjusting the Picture PAN / Tilt calibration Flicker-less modeHold Sharpness Settings for the Host Authentication Host address Access levelSettings for the User Authentication Example admin Access level System Settings Synchronization with NTP server Time is adjust Time adjustmentTime setup year-month-day hourminsec NTP portDefault setting for User name Default setting for Host name WV-NM100 User nameCharacters for Password Default setting for PasswordSnmp Settings Default setting for Equipment name Default setting for Community name public Equipment nameDefault setting for Location Default setting for ContactFirmware Upgrade Using HelpPossible cause / Possible solution TroubleshootingSame subnet If the camera and the PC are connectedIf the camera and the PC are connected in a Different subnetIf Internet Explorer is used If Netscape Communicator is usedError Message List Ddns Camera SpecificationsTerm Explanation Glossary of TermsTerm 2003 N0103-0 V8QA6111BN